LIST OF G ASTM STANDARDS

G1-03(2011) Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
G2/G2M-06(2011) Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at
680°F [360°C] or in Steam at 750°F [400<
G3-89(2010) Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
G3-RUS-89(2010) Стандартная методика использования соглашений, применяемых в электрохимических измерениях при
коррозионных испытаниях
G4-01(2008) Standard Guide for Conducting Corrosion Tests in Field Applications
G5-13 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
G6-07 Standard Test Method for Abrasion Resistance of Pipeline Coatings
G7/G7M-11 Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
G8-96(2010) Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
G8-RUS-96(2010) Стандартный метод испытания для проверки катодного отслаивания покрытий трубопроводов
G9-07 Standard Test Method for Water Penetration into Pipeline Coatings
G10-10 Standard Test Method for Specific Bendability of Pipeline Coatings
G11-04(2012) Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings
G12-07 Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
G14-04(2010)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
G16-95(2010) Standard Guide for Applying Statistics to Analysis of Corrosion Data
G17-07 Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
G18-07 Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines
G20-10 Standard Test Method for Chemical Resistance of Pipeline Coatings
G20-RUS-10 Стандартный метод испытаний для определения химической стойкости покрытий трубопроводов
G21-09 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
G21-RUS-09 Стандартная методика определения плеснестойкости синтетических полимерных материалов
G24-05 Standard Practice for Conducting Exposures to Daylight Filtered Through Glass
G28-02(2008) Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-
Bearing Alloys
G28-RUS-02(2008) Стандартные методы определения восприимчивости к межкристаллитной коррозии деформируемых
хромсодержащих сплавов, обогащенных никелем
G29-96(2010) Standard Practice for Determining Algal Resistance of Plastic Films
G30-97(2009) Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
G32-10 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
G33-99(2010) Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
G34-01(2007) Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO
Test)
G35-98(2010) Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys
to Stress-Corrosion Cracking in Polythionic Acids
G36-94(2006) Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling
Magnesium Chloride Solution
G37-98(2011) Standard Practice for Use of Mattsson’s Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking
Susceptibility of Copper-Zinc Alloys
G38-01(2007) Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
G39-99(2011) Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
G40-13 Standard Terminology Relating to Wear and Erosion
G41-90(2006) Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt
Environment
G42-11 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
G44-99(2005) Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride
Solution
G46-94(2005) Standard Guide for Examination and Evaluation of Pitting Corrosion
G47-98(2011) Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum
Alloy Products
G48-11 : Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of
Ferric Chloride Solution
G49-85(2011) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
G50-10 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
G51-95(2012) Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
G52-00(2011) Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
G55-07 Standard Test Method for Evaluating Pipeline Coating Patch Materials
G56-10 Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials
G57-06(2012) Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
G58-85(2011) Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
G59-97(2009) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
G60-01(2007) Standard Practice for Conducting Cyclic Humidity Exposures
G61-86(2009) Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion
Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
G62-07 Standard Test Methods for Holiday Detection in Pipeline Coatings
G62-RUS-07 Стандартные методы определения пропусков в защитном покрытии трубопровода
G63-99(2007) Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
G64-99(2005) Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
G65-04(2010) Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
G66-99(2005)e1 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum
Alloys (ASSET Test)
G67-13 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by
Mass Loss After Exposure to Nitric Acid (NAMLT Test)
G69-12 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
G70-07 Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
G71-81(2009) Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
G72/G72M-09 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-
Enriched Environment
G73-10 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
G74-08 Standard Test Method for Ignition Sensitivity of Materials to Gaseous Fluid Impact
G75-07 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials
(SAR Number)
G76-07 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
G77-05(2010) Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
G78-01(2012) Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and
Other Chloride-Containing Aqueous Environments
G80-07 Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings
G81-97a(2007) Standard Test Method for Jaw Crusher Gouging Abrasion Test
G82-98(2009) Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
G84-89(2012) Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in
Atmospheric Corrosion Testing
G85-11 Standard Practice for Modified Salt Spray (Fog) Testing
G86-98a(2011) Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid
Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
G87-02(2007) Standard Practice for Conducting Moist SO2 Tests
G88-05 Standard Guide for Designing Systems for Oxygen Service
G90-10 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural
Sunlight
G91-11 Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation
G92-86(2010) Standard Practice for Characterization of Atmospheric Test Sites
G93-03(2011) Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-
Enriched Environments
G94-05 Standard Guide for Evaluating Metals for Oxygen Service
G95-07 Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
G96-90(2008) Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
G97-97(2007) Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground
Applications
G98-02(2009) Standard Test Method for Galling Resistance of Materials
G99-05(2010) Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
G100-89(2010)e1 Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
G101-04(2010) Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
G102-89(2010) Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical
Measurements
G102-RUS-89(2010) Стандартная методика расчета скоростей коррозии и связанных с ней данных по результатам
электрохимических измерений
G103-97(2011) Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu
Alloys in Boiling 6% Sodium Chloride Solution
G105-02(2007) Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
G106-89(2010) Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
G107-95(2008) Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized
Database Input
G108-94(2010) Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and
304L Stainless Steels
G109-07 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement
in Concrete Exposed to Chloride Environments
G110-92(2009) Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by
Immersion in Sodium Chloride + Hydrogen Peroxide Solution
G111-97(2006) Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
G112-92(2009) Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
G113-09 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
G114-07 Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
G115-10 Standard Guide for Measuring and Reporting Friction Coefficients
G116-99(2010) Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
G117-02(2007) Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or
Erosion Tests
G118-02(2007) Standard Guide for Recommended Format of Wear Test Data Suitable for Databases
G119-09 Standard Guide for Determining Synergism Between Wear and Corrosion
G120-01(2008) Standard Practice for Determination of Soluble Residual Contamination in by Soxhlet Extraction
G121-98(2010)e1 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
G122-96(2008) Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
G123-00(2011) Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content
in Boiling Acidified Sodium Chloride Solution
G124-10 Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
G125-00(2008) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
G126-00(2008) Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
G127-95(2008) Standard Guide for the Selection of Cleaning Agents for Oxygen Systems
G128-02(2008) Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems
G129-00(2006) Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to
Environmentally Assisted Cracking
G130-12 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
G131-96(2008) Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques
G132-96(2007) Standard Test Method for Pin Abrasion Testing
G133-05(2010) Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
G134-95(2010)e1 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
G135-95(2007) Standard Guide for Computerized Exchange of Corrosion Data for Metals
G136-03(2009) Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
G137-97(2009) Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring
Configuration
G138-12 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
G139-05(2011) Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy
Products Using Breaking Load Method
G140-02(2008) Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
G141-09 Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials
G142-98(2011) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing
Environments at High Pressure, High Temperature, or Both
G143-03(2009) Standard Test Method for Measurement of Web/Roller Friction Characteristics
G144-01(2006) Standard Test Method for Determination of Residual Contamination of Materials and Components by Total
Carbon Analysis Using a High Temperature Combustion Analyzer
G145-08 Standard Guide for Studying Fire Incidents in Oxygen Systems
G146-01(2007) Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure,
High-Temperature Refinery Hydrogen Service
G147-09 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
G148-97(2011) Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical
Technique
G150-13 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
G151-10 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
G152-06 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
G153-04(2010) Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
G154-12a Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
G155-05a Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
G156-09 Standard Practice for Selecting and Characterizing Weathering Reference Materials
G157-98(2005) Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant
Alloys for the Chemical Process Industries
G158-98(2010) Standard Guide for Three Methods of Assessing Buried Steel Tanks
G160-12 Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil Burial
G161-00(2006) Standard Guide for Corrosion-Related Failure Analysis
G162-99(2010) Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
G163-10 Standard Guide for Digital Data Acquisition in Wear and Friction Measurements
G164-99(2009) Standard Test Method for Determination of Surface Lubrication on Flexible Webs
G165-99(2012) Standard Practice for Determining Rail-to-Earth Resistance
G166-00(2011) Standard Guide for Statistical Analysis of Service Life Data
G167-05(2010) Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer
G168-00(2006) Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
G169-01(2013) Standard Guide for Application of Basic Statistical Methods to Weathering Tests
G170-06(2012) Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
G171-03(2009)e2 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
G172-03(2010) Standard Guide for Statistical Analysis of Accelerated Service Life Data
G173-03(2012) Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface
G174-04(2009)e1 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
G175-03(2011) Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for
Medical and Emergency Applications
G176-03(2009) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—
Cumulative Wear Method
G177-03(2012) Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface
G178-09 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source)
Using the Sharp Cut-On Filter or Spectrographic Technique
G179-04(2011) Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
G180-13 Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in
Cementitious Slurries
G181-11 Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated
Conditions
G182-06 Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings
G183-05(2010) Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
G184-06(2012) Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
G185-06(2012) Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating
Cylinder Electrode
G186-05(2011) Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion
Cracking of Brass Alloys
G187-12a Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
G188-05(2011) Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
G189-07 Standard Guide for Laboratory Simulation of Corrosion Under Insulation
G190-06 Standard Guide for Developing and Selecting Wear Tests
G192-08 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a
Potentiodynamic-Galvanostatic-Potentiostatic Technique
G194-08 Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
G195-08 Standard Guide for Conducting Wear Tests Using a Rotary Platform, Double-Head Abraser
G196-08 Standard Test Method for Galling Resistance of Material Couples
G197-08(2012) Standard Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces
G198-11 Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated
Wood
G199-09 Standard Guide for Electrochemical Noise Measurement
G200-09 Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil
G201-09 Standard Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation
G202-12 Standard Test Method for Using Atmospheric Pressure Rotating Cage
G203-10 Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems
G204-10 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
G205-10 Standard Guide for Determining Corrosivity of Crude Oils
G206-11 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating
Wear Tests
G207-11 Standard Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers
G208-12 Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement
Apparatus
G209-13 Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST