List of ASTM Standard 9801 to 9900

ASTM    D 4676-94 (Reapproved 2012) : Standard Classification for Rubber Compounding Materials – Antidegradants
ASTM    D 4677-87(2013) : Standard Classification for Rubber Compounding Materials – Titanium Dioxide
ASTM    D 4678-11 : Standard Practice for  Rubber<char: emdash>Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM    D 4679-02(2007) : Standard Specification for Rubber General Purpose, Household or Beautician Gloves
ASTM    D 4680-98(2011) : Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM    D 4682-13 : Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants
ASTM    D 4683-13 : Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C
ASTM    D 4684-12 : Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM    D 4685-07(2011)e1 : Standard Test Method for Pile Fabric Abrasion
ASTM    D 4687-14 : Standard Guide for General Planning of Waste Sampling
ASTM    D 4688-99(2013) : Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
ASTM    D 4689-12 : Standard Specification for Adhesive, Casein-Type
ASTM    D 4690-12 : Standard Specification for Urea-Formaldehyde Resin Adhesives
ASTM    D 4691-11 : Standard Practice for  Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
ASTM    D 4692-01(2010) : Standard Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO<sub>4</sub>, SrSO<sub>4</sub>, and BaSO<sub>4</sub>) for Reverse Osmosis and Nanofiltration
ASTM    D 4693-07(2012) : Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
ASTM    D 4694-09 : Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
ASTM    D 4695-03(2008) : Standard Guide for  General Pavement Deflection Measurements
ASTM    D 4696-92(2008) : Standard Guide for Pore-Liquid Sampling from the Vadose Zone
ASTM    D 4698-92(2013) : Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
ASTM    D 4699-03(2013) : Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM    D 4700-91(2006) : Standard Guide for Soil Sampling from the Vadose Zone
ASTM    D 4701-00(2011) : Standard Specification for Technical Grade Methylene Chloride
ASTM    D 4703-10a : Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
ASTM    D 4704-13 : Standard Test Method for Tearing Strength, Tongue Tear of Leather
ASTM    D 4705-13 : Standard Test Method for Stitch Tear Strength of Leather, Double Hole
ASTM    D 4707-09(2013) : Standard Test Method for Measuring Paint Spatter Resistance During Roller Application
ASTM    D 4708-12 : Standard Practice for Preparation of Uniform Free Films of Organic Coatings
ASTM    D 4709-07(2012) : Standard Specification for Methyl Acrylate
ASTM    D 4710-07(2012) : Standard Specification for Acetaldehyde
ASTM    D 4711-89(2009) : Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids
ASTM    D 4713-12 : Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
ASTM    D 4715-98(2012) : Standard Test Method for Coking Value of Tar and Pitch (Alcan)
ASTM    D 4716/D 4716M-14 : Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM    D 4718-87(2007) : Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
ASTM    D 4719-07 : Standard Test Methods for  Prebored Pressuremeter Testing in Soils
ASTM    D 4720-08(2013) : Standard Performance Specification for Soft Window Covering Fabrics for Household Use
ASTM    D 4721-12 : Standard Practice for  Evaluation of the Performance of Machine Washable and Drycleanable Bedcoverings and Accessories
ASTM    D 4723-07e2 : Standard Classification Index of and Descriptions of Textile Flammability Test Methods
ASTM    D 4724-11 : Standard Test Method for Entanglements in Untwisted Filament Yarns by Needle Insertion
ASTM    D 4725-13 : Standard Terminology for Engine Coolants and Related Fluids
ASTM    D 4726-09 : Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
ASTM    D 4727/D 4727M-12 : Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
ASTM    D 4728-06(2012) : Standard Test Method for  Random Vibration Testing of Shipping Containers
ASTM    D 4729-08 : Standard Test Method for  In Situ Stress and Modulus of Deformation Using Flatjack Method
ASTM    D 4730-13 : Standard Specification for Flooding Compounds for Telecommunications Wire and Cable
ASTM    D 4731-13 : Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
ASTM    D 4732-13 : Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
ASTM    D 4733-13 : Standard Test Methods for Solventless Electrical Insulating Varnishes
ASTM    D 4734-12 : Standard Specification for Refined Benzene-545
ASTM    D 4735-09(2014) : Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography
ASTM    D 4737-10 : Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM    D 4739-11 : Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM    D 4740-04(2009) : Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
ASTM    D 4741-13 : Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
ASTM    D 4742-08e1 : Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
ASTM    D 4745-11ae1 : Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
ASTM    D 4746-2014 : Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
ASTM    D 4747-02(2008) : Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography
ASTM    D 4748-10 : Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
ASTM    D 4749-87(2012) : Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM    D 4751-12 : Standard Test Method for Determining Apparent Opening Size of a Geotextile
ASTM    D 4752-10 : Standard Practice for  Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
ASTM    D 4753-07 : Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
ASTM    D 4754-11 : Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
ASTM    D 4755-95(2010) : Standard Test Method for Free Halogens in Halogenated Organic Solvents and Their Admixtures
ASTM    D 4756-13 : Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit
ASTM    D 4759-11 : Standard Practice for  Determining the Specification Conformance of Geosynthetics
ASTM    D 4761-13 : Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM    D 4762-11a : Standard Guide for Testing Polymer Matrix Composite Materials
ASTM    D 4763-06(2012) : Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy
ASTM    D 4764-01(2012) : Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
ASTM    D 4765-13 : Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes
ASTM    D 4766-98(2009)e1 : Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)
ASTM    D 4767-11 : Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
ASTM    D 4768-11 : Standard Test Method for  Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary-Butyl Phenol in Insulating Liquids by Gas Chromatography
ASTM    D 4769-12 : Standard Specification for Woven and Warp Knitted Comforter Fabrics
ASTM    D 4771/D 4771M-09 : Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture
ASTM    D 4772-14 : Standard Test Method for Surface Water Absorption of Terry Fabrics (Water Flow)
ASTM    D 4773-02(2012) : Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
ASTM    D 4774-11e1 : Standard Specification for User Applied Drug Labels in Anesthesiology
ASTM    D 4775/D 4775M-09 : Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)
ASTM    D 4776/D 4776M-10 : Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure
ASTM    D 4778-10 : Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
ASTM    D 4780-12 : Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
ASTM    D 4781-03(2013) : Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM    D 4782-10 : Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
ASTM    D 4783-01(2013) : Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM    D 4784-93(2010) : Standard for LNG Density Calculation Models
ASTM    D 4785-08(2013)E1 : Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water
ASTM    D 4786-00(2010) : Standard Test Method for Stitch Tear Strength, Single Hole
ASTM    D 4787-13 : Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
ASTM    D 4788-03(2013) : Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
ASTM    D 4789-12 : Standard Test Method for Solution Color of Bisphenol A (4,4′-Isopropylidenediphenol)
ASTM    D 4790-11 : Standard Terminology of Aromatic Hydrocarbons and Related Chemicals
ASTM    D 4791-10 : Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM    D 4792/D 4792M-13 : Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions
ASTM    D 4793-09 : Standard Test Method for Sequential Batch Extraction of Waste with Water
ASTM    D 4794-94(2009) : Standard Test Method for Determination of Ethoxyl or Hydroxyethoxyl Substitution in Cellulose Ether Products by Gas Chromatography
ASTM    D 4795-94(2008) : Standard Test Method for Nitrogen Content of Soluble Nitrocellulose<span class=’unicode’>&#x2014;</span>Alternative Method

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST