List of ASTM Standard 9701 to 9800

ASTM    D 4551-12 : Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water- Containment Membrane
ASTM    D 4552/D 4552M-10 : Standard Practice for Classifying Hot-Mix Recycling Agents
ASTM    D 4553-08 : Standard Test Method for  Determining In Situ Creep Characteristics of Rock
ASTM    D 4554-12 : Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities
ASTM    D 4555-10 : Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test
ASTM    D 4559-99(2010) : Standard Test Method for Volatile Matter in Silicone Fluid
ASTM    D 4561-11 : Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials
ASTM    D 4562-01(2013) : Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM    D 4563-02(2008) : Standard Test Method for  Determination by Atomic Absorption Spectroscopy of Titanium Dioxide   Content of Pigments Recovered From Whole Paint
ASTM    D 4565-10 : Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
ASTM    D 4566-08e1 : Standard Test Methods for  Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
ASTM    D 4567-03(2013) : Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM    D 4568-13 : Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
ASTM    D 4569-06(2012) : Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur
ASTM    D 4570-02(2012) : Standard Test Method for  Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM    D 4571-06 (Reapproved 2012) : Standard Test Methods for Rubber Compounding Materials – Determination of Volatile Material
ASTM    D 4572-89 (Reapproved 2012) : Standard Test Method for Rubber Chemicals – Wet Sieve Analysis of Sulfur
ASTM    D 4573-03(2009) : Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur
ASTM    D 4574-06 (Reapproved 2012) : Standard Test Methods for Rubber Compounding Materials – Determination of Ash Content
ASTM    D 4575-09 : Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM    D 4576-08(2013) : Standard Test Method for Mold Growth Resistance of Wet Blue
ASTM    D 4577-05(2010) : Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM    D 4578-06 (Reapproved 2012) : Standard Test Methods for Rubber Chemicals – Determination of Percent Sulfur by Extraction
ASTM    D 4579-00 (Reapproved 2012) : Standard Practice for Handling an Acid Degreaser or Still
ASTM    D 4580/D 4580M-12 : Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding
ASTM    D 4582-10 : Standard Practice for Calculation and Adjustment of the Stiff and Davis Stability Index for Reverse Osmosis
ASTM    D 4583-95(2009) : Standard Practice for Carbon Black—Calculation of Process Indexes From an Analysis of Process Control Data
ASTM    D 4584-05(2010) : Standard Test Method for Measuring Apparent pH of Electrocoat Baths
ASTM    D 4585/D 4585M-13 : Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
ASTM    D 4586/D 4586M-07 (Reapproved 2012)e1 : Standard Specification for Asphalt Roof Cement, Asbestos-Free
ASTM    D 4587-11 : Standard Practice for  Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM    D 4590-13 : Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry
ASTM    D 4591-07 (Reapproved 2012) : Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM    D 4592-12 : Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life
ASTM    D 4594-96(2009) : Standard Test Method for Effects of Temperature on Stability of Geotextiles
ASTM    D 4595-11 : Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM    D 4596-09 : Standard Practice for  Collection of Channel Samples of Coal in a Mine
ASTM    D 4597-10 : Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM    D 4599-03(2009)e1 : Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM    D 4600-95(2010) : Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM    D 4601/D 4601M-04 (Reapproved 2012)e1 : Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
ASTM    D 4602-93(2008) : Standard Guide for  Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
ASTM    D 4603-03(2011)e1 : Standard Test Method for  Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
ASTM    D 4606-03(2007) : Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
ASTM    D 4607-94(2011) : Standard Test Method for Determination of Iodine Number of Activated Carbon
ASTM    D 4608-89(2009) : Standard Test Method for Citrate in Detergents
ASTM    D 4609-08 : Standard Guide for  Evaluating Effectiveness of Admixtures for Soil Stabilization
ASTM    D 4610-98(2013) : Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings
ASTM    D 4611-08 : Standard Test Method for  Specific Heat of Rock and Soil
ASTM    D 4612-08 : Standard Practice for  Calculating Thermal Diffusivity of Rocks
ASTM    D 4614-11 : Standard Specification for  Ethyl Acetate (All Grades)
ASTM    D 4615-12 : Standard Specification for n-Butyl Acetate (All Grades)
ASTM    D 4616-95(2013) : Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM    D 4618-92(2010)e1 : Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application
ASTM    D 4619-12 : Standard Practice for  Inspection of Linings in Operating Flue Gas Desulfurization Systems
ASTM    D 4620-02 (Reapproved 2012) : Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM    D 4623-08 : Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method<span class=’unicode’>&#x2014;</span>USBM Borehole Deformation Gauge
ASTM    D 4625-04(2009) : Standard Test Method for Distillate Fuel Storage Stability at 43&#176;C (110&#176;F)
ASTM    D 4626-95(2010) : Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM    D 4627-12 : Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids
ASTM    D 4628-05(2011)e1 : Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
ASTM    D 4629-12 : Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
ASTM    D 4630-96(2008) : Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
ASTM    D 4631-95(2008) : Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
ASTM    D 4632/D 4632M-08(2013)E2 : Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
ASTM    D 4633-10 : Standard Test Method for Energy Measurement for Dynamic Penetrometers
ASTM    D 4634-11a : Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
ASTM    D 4635-08a : Standard Specification for  Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
ASTM    D 4636-14 : Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
ASTM    D 4637/D 4637M-14e1 : Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
ASTM    D 4638-11 : Standard Guide for  Preparation of Biological Samples for Inorganic Chemical Analysis
ASTM    D 4640-86(2009) : Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM    D 4641-12 : Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms
ASTM    D 4642-04(2010) : Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM    D 4643-08 : Standard Test Method for  Determination of Water (Moisture) Content of Soil by Microwave Oven Heating
ASTM    D 4644-08 : Standard Test Method for  Slake Durability of Shales and Similar Weak Rocks
ASTM    D 4645-08 : Standard Test Method for  Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method
ASTM    D 4646-03(2008) : Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
ASTM    D 4647/D 4647M-13 : Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
ASTM    D 4648/D 4648M-13 : Standard Test Method for Laboratory Miniature Vane Shear Test for Saturated Fine-Grained Clayey Soil
ASTM    D 4649-03(2009) : Standard Guide for Selection and Use of Stretch Wrap Films
ASTM    D 4650-14 : Standard Specification for Normal Butane Thermophysical Property Tables
ASTM    D 4651-14 : Standard Specification for Isobutane Thermophysical Property Tables
ASTM    D 4652-05(2012) : Standard Specification for Silicone Fluid Used for Electrical Insulation
ASTM    D 4653-87(2009) : Standard Test Method for Total Chlorides in Leather
ASTM    D 4654-87(2009) : Standard Test Method for Sulfate Basicity in Leather
ASTM    D 4655-95(2012) : Standard Test Methods for  Sulfates in Leather (Total, Neutral, and Combined Acid)
ASTM    D 4658-09 : Standard Test Method for  Sulfide Ion in Water
ASTM    D 4659-14 : Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates
ASTM    D 4660-12 : Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate
ASTM    D 4661-13 : Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates
ASTM    D 4662-08(2011)e1 : Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols
ASTM    D 4663-10 : Standard Test Method for Polyurethane Raw Materials  Determination of Hydrolyzable Chlorine of Isocyanates
ASTM    D 4669-07(2013)E1 : Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols
ASTM    D 4670-07(2012)E1 : Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter In Polyols
ASTM    D 4671-05(2010)e1 : Standard Test Method for Polyurethane Raw Materials  Determination of Unsaturation of Polyols
ASTM    D 4672-12 : Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols
ASTM    D 4673-02(2008) : Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
ASTM    D 4674-02a(2010) : Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
ASTM    D 4675-14 : Standard Guide for Selection and Use of Flat Strapping Materials

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST