List of ASTM Standard 9301 to 9400

ASTM    D 4026-06(2012) : Standard Test Method for  Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
ASTM    D 4027-98(2011) : Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM    D 4028/D 4028M-13 : Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn
ASTM    D 4029/D 4029M-10 : Standard Specification for Finished Woven Glass Fabrics
ASTM    D 4030/D 4030M-09e1 : Standard Specification for Glass Fiber Cord and Sewing Thread
ASTM    D 4031-07(2012) : Standard Test Method for Bulk Properties of Textured Yarns
ASTM    D 4032-08(2012) : Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM    D 4035-14 : Standard Performance Specification for Knitted Necktie and Scarf Fabrics
ASTM    D 4037-02(2013) : Standard Performance Specification for Woven, Knitted, or Flocked Bedspread Fabrics
ASTM    D 4039-09 : Standard Test Method for Reflection Haze of High-Gloss Surfaces
ASTM    D 4040-10 : Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer
ASTM    D 4041/D 4041M-05(2010)e1 : Standard Test Method for Determining Spray Patterns of Manually Operated Pump Dispensers
ASTM    D 4042-93(2009) : Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils
ASTM    D 4043-96(2010)e1 : Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
ASTM    D 4044-96(2008) : Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers
ASTM    D 4045-04(2010) : Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
ASTM    D 4046-14 : Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
ASTM    D 4047-13 : Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
ASTM    D 4048-10 : Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
ASTM    D 4049-06(2011) : Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
ASTM    D 4050-14 : Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems
ASTM    D 4051-10 : Standard Practice for Preparation of Low-Pressure Gas Blends
ASTM    D 4052-11 : Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM    D 4054-09 : Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives
ASTM    D 4055-04(2013) : Standard Test Method for Pentane Insolubles by Membrane Filtration
ASTM    D 4056-01(2010) : Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
ASTM    D 4057-12 : Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM    D 4058-96(2011)e1 : Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM    D 4059-00(2010) : Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography
ASTM    D 4060-10 : Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM    D 4061-13 : Standard Test Method for Retroreflectance of Horizontal Coatings
ASTM    D 4062-11 : Standard Test Method for Leveling of Paints by Draw-Down Method
ASTM    D 4063-99(2009) : Standard Specification for Pressboard for Electrical Insulating Purposes
ASTM    D 4065-12 : Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
ASTM    D 4066-13 : Standard Classification System for Nylon Injection and Extrusion Materials (PA)
ASTM    D 4067-11 : Standard Classification System for and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
ASTM    D 4068-09 : Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
ASTM    D 4069-95(2008) : Standard Specification for  Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams
ASTM    D 4070-08 : Standard Specification for  Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
ASTM    D 4071-84(2011) : Standard Practice for  Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems
ASTM    D 4072-98(2013) : Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
ASTM    D 4073-06(2013) : Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes
ASTM    D 4074/D 4074M-11 : Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples
ASTM    D 4075-06(2012) : Standard Test Methods for  Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals
ASTM    D 4077-11 : Standard Specification for Cumene (Isopropylbenzene)
ASTM    D 4078-02(2008) : Standard Specification for  Water Emulsion Floor Polish
ASTM    D 4079-00(2011) : Standard Specification for  Vapor-Degreasing Grade Methylene Chloride
ASTM    D 4080-00(2011) : Standard Specification for  Trichloroethylene, Technical and Vapor-Degreasing Grade
ASTM    D 4081-00(2011) : Standard Specification for  Drycleaning-Grade Perchloroethylene
ASTM    D 4082-10 : Standard Test Method for  Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants
ASTM    D 4083-89(2007) : Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)
ASTM    D 4084-07(2012) : Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
ASTM    D 4085-93(2013) : Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM    D 4086-92a(2012) : Standard Practice for Visual Evaluation of Metamerism
ASTM    D 4092-07(2013) : Standard Terminology for Plastics: Dynamic Mechanical Properties
ASTM    D 4093-95(2010) : Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM    D 4094-07 : Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers
ASTM    D 4095-97(2008) : Standard Practice for  Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes
ASTM    D 4096-91(2009) : Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
ASTM    D 4097-01(2010) : Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM    D 4101-14 : Standard Specification for Polypropylene Injection and Extrusion Materials
ASTM    D 4102-82(2008) : Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers
ASTM    D 4103-90(2009) : Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
ASTM    D 4104-96(2010)e1 : Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)
ASTM    D 4105-96(2008) : Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
ASTM    D 4106-96(2008) : Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
ASTM    D 4107-08(2013) : Standard Test Method for Tritium in Drinking Water
ASTM    D 4111-12 : Standard Performance Specification for  Woven Napery and Tablecloth Fabrics: Household and Institutional
ASTM    D 4112-02(2008) : Standard Performance Specification for  Woven Umbrella Fabrics
ASTM    D 4113-02(2013) : Standard Performance Specification for Woven Slipcover Fabrics
ASTM    D 4114-02(2008) : Standard Performance Specification for  Woven Flat Lining Fabrics for Women’s and Girls’ Apparel
ASTM    D 4115-14 : Standard Performance Specification for Women’s and Girls’ Knitted and Woven Dress Glove Fabrics
ASTM    D 4116-14 : Standard Performance Specification for Women’s and Girls’ Knitted and Woven Corset-Girdle-Combination Fabrics
ASTM    D 4118-01(2008) : Standard Performance Specification for Women’s Woven Coverall, Dungaree, Overall, and Shop Coat Fabrics
ASTM    D 4119-14 : Standard Performance Specification for Men’s and Boys’ Knitted Dress Shirt Fabrics
ASTM    D 4120-07(2012) : Standard Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests
ASTM    D 4122-10a : Standard Practice for Carbon Black-Evaluation of an Industry Reference Black
ASTM    D 4124-09 : Standard Test Method for  Separation of Asphalt into Four Fractions
ASTM    D 4125/D 4125M-10 : Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
ASTM    D 4126-02 (Reapproved 2012) : Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane
ASTM    D 4127-12 : Standard Terminology Used with Ion-Selective Electrodes
ASTM    D 4128-06(2012) : Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry
ASTM    D 4129-05(2013) : Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
ASTM    D 4130-08 : Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines
ASTM    D 4131-84(2014) : Standard Practice for Sampling Fish with Rotenone
ASTM    D 4132-82(2012) : Standard Practice for Sampling Phytoplankton with Conical Tow Nets
ASTM    D 4133-82(2012) : Standard Practice for Sampling Phytoplankton with Pumps
ASTM    D 4134-82(2012) : Standard Practice for Sampling Phytoplankton with a Clarke-Bumpus Plankton Sampler
ASTM    D 4135-82(2012) : Standard Practice for Sampling Phytoplankton With Depth-Integrating Samplers
ASTM    D 4136-82(2012) : Standard Practice for Sampling Phytoplankton with Water-Sampling Bottles
ASTM    D 4137-82(2012) : Standard Practice for Preserving Phytoplankton Samples
ASTM    D 4138-07A(2013) : Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
ASTM    D 4139-04(2009) : Standard Guide for Determining Volatile and Nonvolatile Content of Pigments
ASTM    D 4140-07(2013) : Standard Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and Solvents
ASTM    D 4141/D 4141M-14 : Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
ASTM    D 4142-89(2009) : Standard Guide for Testing Epoxy Resins
ASTM    D 4143-89(2009) : Standard Guide for Testing Latex Vehicles
ASTM    D 4144-94(2010) : Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
ASTM    D 4145-10 : Standard Test Method for Coating Flexibility of Prepainted Sheet
ASTM    D 4146-10 : Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel


Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *


    Testing Needed *





    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    Telephone : (0253) 2361782
    Mobile : +91 9552508782



    [sp_faq category="19"]


    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services


    Need help or have a question? (0253) 2361782