List of ASTM Standard 9201 to 9300

ASTM    D 3900-05a(2010) : Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM    D 3902-90(2012) : Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas
ASTM    D 3903-03(2007) : Standard Specification for  Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
ASTM    D 3906-03(2013) : Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM    D 3907/D 3907M-13 : Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM    D 3908-03(2008) : Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
ASTM    D 3909/D 3909M-97b (Reapproved 2012)e1 : Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules
ASTM    D 3910-11 : Standard Practices for  Design, Testing, and Construction of Slurry Seal
ASTM    D 3911-08 : Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions
ASTM    D 3912-10 : Standard Test Method for  Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants
ASTM    D 3913-03(2009) : Standard Test Method for Acidity in Basic Chromium Tanning Liquors
ASTM    D 3914-02(2008) : Standard Test Method for  In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
ASTM    D 3915-06 : Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications
ASTM    D 3916-08 : Standard Test Method for  Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
ASTM    D 3917-12 : Standard Specification for  Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
ASTM    D 3918-11 : Standard Terminology Relating to Reinforced Plastic Pultruded Products
ASTM    D 3919-08 : Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
ASTM    D 3920-12 : Standard Test Method for Strontium in Water
ASTM    D 3923-08(2014) : Standard Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices
ASTM    D 3924-80(2011) : Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
ASTM    D 3925-02(2010) : Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
ASTM    D 3926-05(2011) : Standard Test Methods for Percent Solids in Titanium Dioxide Slurries
ASTM    D 3928-00a(2010) : Standard Test Method for Evaluation of Gloss or Sheen Uniformity
ASTM    D 3929-03(2010)e1 : Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM    D 3930-08 : Standard Specification for  Adhesives for Wood-Based Materials for Construction of Manufactured       Homes
ASTM    D 3931-08 : Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression    Loading
ASTM    D 3933-98(2010) : Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
ASTM    D 3934-90(2007) : Standard Test Method for Flash/No Flash Test-Equilibrium Method by a Closed-Cup Apparatus
ASTM    D 3935-09 : Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material
ASTM    D 3936-12 : Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering
ASTM    D 3937-12 : Standard Test Method for  Crimp Frequency of Manufactured Staple Fibers
ASTM    D 3938-07 : Standard Guide for Determining or Confirming Care Instructions for Apparel and Other Textile Products
ASTM    D 3939/D 3939M-13 : Standard Test Method for Snagging Resistance of Fabrics (Mace)
ASTM    D 3941-90(2007) : Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus
ASTM    D 3942-03(2013) : Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
ASTM    D 3943-10 : Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
ASTM    D 3944-12 : Standard Test Method for Solidification Point of Petroleum Wax
ASTM    D 3948-13 : Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM    D 3949-99(2004) : Standard Specification for Coated Glass Fabrics Used for Electrical Insulation
ASTM    D 3950-12A : Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM    D 3951-10 : Standard Practice for Commercial Packaging
ASTM    D 3953-13 : Standard Specification for Strapping, Flat Steel and Seals
ASTM    D 3954-94(2010) : Standard Test Method for Dropping Point of Waxes
ASTM    D 3955-13 : Standard Specification for Electrical Insulating Varnishes
ASTM    D 3956-12 : Standard Specification for Methane Thermophysical Property Tables
ASTM    D 3957-09 : Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings
ASTM    D 3958-06(2011) : Standard Test Methods for  Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber)
ASTM    D 3960-05(2013) : Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM    D 3963/D 3963M-01(2007) : Standard Specification for  Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing  Bars
ASTM    D 3964-10 : Standard Practice for Selection of Coating Specimens for Appearance Measurements
ASTM    D 3965-11 : Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
ASTM    D 3966/D 3966M-07(2013)E1 : Standard Test Methods for Deep Foundations Under Lateral Load
ASTM    D 3967-08 : Standard Test Method for  Splitting Tensile Strength of Intact Rock Core Specimens
ASTM    D 3968-97(2007) : Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures
ASTM    D 3969-01(2012) : Standard Test Method for Zirconium in Paint Driers by EDTA Method
ASTM    D 3970-05(2011) : Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination
ASTM    D 3971-89(2010) : Standard Test Method for Dichloromethane-Soluble Matter in Cellulose
ASTM    D 3972-09 : Standard Test Method for Isotopic Uranium in Water by Radiochemistry
ASTM    D 3973-85(2011) : Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
ASTM    D 3974-09 : Standard Practices for  Extraction of Trace Elements from Sediments
ASTM    D 3975-93(2014) : Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
ASTM    D 3976-92(2010) : Standard Practice for Preparation of Sediment Samples for Chemical Analysis
ASTM    D 3977-97(2013)E1 : Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM    D 3978-04(2012) : Standard Practice for Algal Growth Potential Testing with Pseudokirchneriella subcapitata
ASTM    D 3981-09a : Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM    D 3982-08(2014) : Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts
ASTM    D 3983-98(2011) : Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM    D 3984-13 : Standard Specification for Ethane Thermophysical Property Tables
ASTM    D 3985-05(2010)e1 : Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
ASTM    D 3986-11 : Standard Test Method for  Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
ASTM    D 3987-12 : Standard Practice for Shake Extraction of Solid Waste with Water
ASTM    D 3988-05(2011) : Standard Test Method for Vanadium in Paint Driers by EDTA Method
ASTM    D 3989-01(2012) : Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method
ASTM    D 3990-12E1 : Standard Terminology Relating to Fabric Defects
ASTM    D 3991-94(2012)e1 : Standard Specifications for Fineness of Wool or Mohair and Assignment of Grade
ASTM    D 3992-94(2012)e1 : Standard Specifications for Fineness of Wool Top or Mohair Top and Assignment of Grade
ASTM    D 3994-14 : Standard Performance Specification for Woven Swimwear Fabrics
ASTM    D 3995-14 : Standard Performance Specification for Men’s and Women’s Knitted Career Apparel Fabrics: Dress and Vocational
ASTM    D 3996-14 : Standard Performance Specification for Knit Swimwear Fabrics
ASTM    D 3997/D 3997M-97(2009) : Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
ASTM    D 3999/D 3999M-11E1 : Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
ASTM    D 4000-13 : Standard Classification System for Specifying Plastic Materials
ASTM    D 4001-13 : Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM    D 4002-81(2008) : Standard Practice for  Evaluation of Buffable Shoe Polish
ASTM    D 4003-98(2009) : Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
ASTM    D 4004-06(2012) : Standard Test Methods for  Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
ASTM    D 4005-92(2010) : Standard Test Method for Plastic-Coated Fabrics—Completeness of Fusion of PVC Dispersion Coatings
ASTM    D 4006-11(2012)E1 : Standard Test Method for Water in Crude Oil by Distillation
ASTM    D 4007-11E1 : Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM    D 4008-95(2009) : Standard Test Method for Measuring Anti-Soil Deposition Properties of Laundry Detergents (Not Suitable for Detergent Ranking)
ASTM    D 4009-92(2011) : Standard Guide for  Foam Stability of Hand Dishwashing Detergents
ASTM    D 4012-81(2009) : Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
ASTM    D 4014-03(2012) : Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
ASTM    D 4015-07 : Standard Test Methods for Modulus and Damping of Soils by Resonant-Column Method
ASTM    D 4016-14 : Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer (Laboratory Method)
ASTM    D 4017-02(2008)e1 : Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
ASTM    D 4018-11 : Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
ASTM    D 4020-11 : Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
ASTM    D 4024-12 : Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM    D 4025-08A(2013) : Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST