LIST OF ASTM STANDARDS  901 to 1000

ASTM    E 278-01(2010)e1 : Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry
ASTM    A 278/A 278M-01(2011) : Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650&#176F (350&#176C)
ASTM    B 279-13 : Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
ASTM    E 279-97(2010) : Standard Test Method for  Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test
ASTM    D 279-02(2012) : Standard Test Methods for Bleeding of Pigments
ASTM    C 279-13A : Standard Specification for Chemical-Resistant Masonry Units
ASTM    D 280-01(2012) : Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments
ASTM    B 280-13 : Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
ASTM    E 280-10 : Standard Reference Radiographs for  Heavy-Walled (4<span class=’unicode’>&#x00BD;</span> to 12-in. (114 to 305-mm)) Steel Castings
ASTM    B 281-88(2013) : Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
ASTM    D 281-12 : Standard Test Method for  Oil Absorption of Pigments by Spatula Rub-out
ASTM    C 282-10 : Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test)
ASTM    D 283-13 : Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments
ASTM    B 283/B 283M-14 : Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
ASTM    E 283-04(2012) : Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
ASTM    C 283-13 : Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid
ASTM    A 283/A 283M-13 : Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
ASTM    E 284-13B : Standard Terminology of Appearance
ASTM    E 285-08 : Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
ASTM    A 285/A 285M-12 : Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
ASTM    C 285-10 : Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
ASTM    C 286-99(2009) : Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems
ASTM    B 286-07(2012) : Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
ASTM    D 287-12B : Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
ASTM    E 287-02(2012) : Standard Specification for Laboratory Glass Graduated Burets
ASTM    C 287-98(2012) : Standard Specification for Chemical-Resistant Sulfur Mortar
ASTM    F 288-96(2014) : Standard Specification for Tungsten Wire for Electron Devices and Lamps
ASTM    A 288-91(2013) : Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
ASTM    C 288-87(2009) : Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
ASTM    E 288-10 : Standard Specification for Laboratory Glass Volumetric Flasks
ASTM    E 289-04(2010) : Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM    F 289-96(2014) : Standard Specification for Molybdenum Wire and Rod for Electronic Applications
ASTM    C 289-07 : Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
ASTM    A 289/A 289M-97(2013) : Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
ASTM    A 290/A 290M-05(2010) : Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
ASTM    F 290-94(2010) : Standard Specification for Round Wire for Winding Electron Tube Grid Laterals
ASTM    E 290-13 : Standard Test Methods for Bend Testing of Material for Ductility
ASTM    A 291/A 291M-05(2010) : Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
ASTM    E 291-09 : Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
ASTM    D 291-07(2012) : Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal
ASTM    E 292-09e1 : Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
ASTM    D 293-93(2010) : Standard Test Method for the Sieve Analysis of Coke
ASTM    C 293/C 293M-10 : Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM    B 294-10 : Standard Test Method for Hardness Testing of Cemented Carbides
ASTM    C 294-12 : Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
ASTM    C 295/C 295M-12 : Standard Guide for  Petrographic Examination of Aggregates for Concrete
ASTM    E 295-82(2014) : Standard Test Method for Measured Speed of Oil Diffusion Pumps
ASTM    D 295-12 : Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation
ASTM    A 295/A 295M-09 : Standard Specification for High-Carbon Anti-Friction Bearing Steel
ASTM    B 296-03(2014) : Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
ASTM    E 296-70(2010) : Standard Practice for Ionization Gage Application to Space Simulators
ASTM    C 296/C 296M-00(2009)e1 : Standard Specification for Asbestos-Cement Pressure Pipe
ASTM    D 297-13 : Standard Test Methods for Rubber Products – Chemical Analysis
ASTM    A 297/A 297M-14 : Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
ASTM    C 297/C 297M-04(2010) : Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM    E 298-08 : Standard Test Methods for  Assay of Organic Peroxides
ASTM    B 298-12 : Standard Specification for Silver-Coated Soft or Annealed Copper Wire
ASTM    B 299-13 : Standard Specification for Titanium Sponge
ASTM    D 299/D 299M-04(2009)e1 : Standard Specification for Asbestos Yarns
ASTM    E 299-08 : Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
ASTM    A 299/A 299M-09(2014) : Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
ASTM    E 300-03(2009) : Standard Practice for Sampling Industrial Chemicals
ASTM    B 301/B 301M-13 : Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
ASTM    C 301-13 : Standard Test Methods for Vitrified Clay Pipe
ASTM    A 302/A 302M-12 : Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
ASTM    F 302-09 : Standard Practice for Field Sampling of Aerospace Fluids in Containers
ASTM    C 302-13 : Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
ASTM    B 302-12 : Standard Specification for Threadless Copper Pipe, Standard Sizes
ASTM    C 303-10 : Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
ASTM    E 303-93(2013) : Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM    F 303-08 : Standard Practices for Sampling for Particles in Aerospace Fluids and Components
ASTM    D 304-11 : Standard Specification for  <span class=”italic”>n</span>-Butyl Alcohol (Butanol)
ASTM    A 304-11 : Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
ASTM    E 305-13 : Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM    C 305-13 : Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
ASTM    D 305-84(2008) : Standard Test Method for  Solvent-Extractable Material in Black Pigments
ASTM    B 306-13 : Standard Specification for Copper Drainage Tube (DWV)
ASTM    E 307-72(2014) : Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
ASTM    A 307-12 : Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
ASTM    C 307-03(2012) : Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
ASTM    F 307-13 : Standard Practice for Sampling Pressurized Gas for Gas Analysis
ASTM    B 308/B 308M-10 : Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
ASTM    E 308-13 : Standard Practice for Computing the Colors of Objects by Using the CIE System
ASTM    C 308-00(2012)e1 : Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
ASTM    A 308/A 308M-10 : Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
ASTM    A 309-01(2012) : Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
ASTM    C 309-11 : Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
ASTM    E 309-11 : Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
ASTM    F 309-04(2010) : Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
ASTM    E 310-10 : Standard Reference Radiographs for Tin Bronze Castings
ASTM    F 310-07(2012) : Standard Practice for Sampling Cryogenic Aerospace Fluids
ASTM    F 311-08(2013) : Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
ASTM    C 311/C 311M-13 : Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
ASTM    A 311/A 311M-04(2010) : Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
ASTM    B 311-13 : Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
ASTM    D 312-00(2006) : Standard Specification for Asphalt Used in Roofing
ASTM    A 312/A 312M-14 : Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
ASTM    F 312-08 : Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
ASTM    B 312-14 : Standard Test Method for Green Strength of Specimens Compacted from Metal Powders

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST