List of ASTM Standard 8701 to 8800

ASTM    D 3154-14 : Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)
ASTM    D 3155-11 : Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures
ASTM    D 3156-96(2011) : Standard Practice for  Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
ASTM    D 3157-05(2010)e1 : Standard Test Method for Rubber from Natural Sources—Color
ASTM    D 3159-10 : Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials
ASTM    D 3160-12 : Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (&agr;–Methylstyrene)
ASTM    D 3161/D 3161M-14 : Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)
ASTM    D 3162-12 : Standard Test Method for  Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
ASTM    D 3163-01(2014) : Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM    D 3164-03(2011) : Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading (Withdrawn 2012)
ASTM    D 3165-07(2014) : Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM    D 3166-99(2012) : Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
ASTM    D 3167-10 : Standard Test Method for Floating Roller Peel Resistance of Adhesives
ASTM    D 3168-85(2011) : Standard Practice for Qualitative Identification of Polymers in Emulsion Paints
ASTM    D 3170-12 : Standard Test Method for Chipping Resistance of Coatings
ASTM    D 3171-11 : Standard Test Methods for  Constituent Content of Composite Materials
ASTM    D 3172-13 : Standard Practice for Proximate Analysis of Coal and Coke
ASTM    D 3173-11 : Standard Test Method for  Moisture in the Analysis Sample of Coal and Coke
ASTM    D 3174-12 : Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
ASTM    D 3175-11 : Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
ASTM    D 3176-09 : Standard Practice for Ultimate Analysis of Coal and Coke
ASTM    D 3180-12 : Standard Practice for  Calculating Coal and Coke Analyses from As-Determined to Different Bases
ASTM    D 3181-10 : Standard Guide for Conducting Wear Tests on Textiles
ASTM    D 3182-07(2012) : Standard Practice for  Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM    D 3183-10 : Standard Practice for Rubber<span class=’unicode’>&#x2014;</span>Preparation of Pieces for Test Purposes from Products
ASTM    D 3184-11 : Standard Practice for Rubber<char: emdash>Evaluation of NR (Natural Rubber)
ASTM    D 3185-06(2010) : Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil
ASTM    D 3186-07(2011) : Standard Test Methods for  Rubber&mdash;Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil
ASTM    D 3187-06(2011) : Standard Test Methods for  Rubber&mdash;Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
ASTM    D 3188-06(2010) : Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber)
ASTM    D 3189-06(2011) : Standard Test Methods for  Rubber&mdash;Evaluation of Solution BR (Polybutadiene Rubber)
ASTM    D 3190-06(2010) : Standard Test Method for Rubber-Evaluation of Chloroprene Rubber (CR)
ASTM    D 3191-10 : Standard Test Methods for  Carbon Black in SBR (Styrene-Butadiene Rubber)<span class=’unicode’>&#x2014;</span>Recipe and Evaluation Procedures
ASTM    D 3192-09 : Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
ASTM    D 3193-09 : Standard Specification for Ethylbenzene
ASTM    D 3194-04(2009) : Standard Test Method for Rubber From Natural Sources-Plasticity Retention Index (PRI)
ASTM    D 3195/D 3195M-10 : Standard Practice for Rotameter Calibration
ASTM    D 3198-97(2007) : Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures
ASTM    D 3200-74(2012) : Standard Specification and Test Method for  Establishing Recommended Design Stresses for Round Timber Construction Poles
ASTM    D 3201/D 3201M-13 : Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
ASTM    D 3203/D 3203M-11 : Standard Test Method for  Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
ASTM    D 3206-08 : Standard Test Method for  Soil Resistance of Floor Polishes
ASTM    D 3207-92(2008) : Standard Test Method for  Detergent Resistance of Floor Polish Films
ASTM    D 3209-93(2008) : Standard Test Method for  Freeze/Thaw Resistance of Polymer Floor Polishes
ASTM    D 3210-95(2008) : Standard Test Method for  Comparing Colors of Films from Water-Emulsion Floor Polishes
ASTM    D 3212-07(2013) : Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
ASTM    D 3213-13 : Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil
ASTM    D 3217/D 3217M-13 : Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
ASTM    D 3218-07(2012) : Standard Specification for Polyolefin Monofilaments
ASTM    D 3222-05(2010) : Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
ASTM    D 3223-12 : Standard Test Method for Total Mercury in Water
ASTM    D 3227-13 : Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM    D 3228-08 : Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
ASTM    D 3230-13 : Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM    D 3231-13 : Standard Test Method for Phosphorus in Gasoline
ASTM    D 3233-93(2009)e1 : Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)
ASTM    D 3235-06(2011) : Standard Test Method for Solvent Extractables in Petroleum Waxes
ASTM    D 3236-88(2009) : Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
ASTM    D 3237-12 : Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM    D 3238-95(2010) : Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
ASTM    D 3239-91(2011) : Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
ASTM    D 3240-11 : Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM    D 3241-14 : Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM    D 3242-11 : Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM    D 3244-12 : Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
ASTM    D 3246-14 : Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM    D 3249-95(2011) : Standard Practice for  General Ambient Air Analyzer Procedures
ASTM    D 3251-04(2009) : Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
ASTM    D 3256-86(2009) : Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments
ASTM    D 3257-06(2012) : Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography
ASTM    D 3258-04(2010)e1 : Standard Test Method for Porosity of White or Near White Paint Films by Staining
ASTM    D 3260-01(2011) : Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products
ASTM    D 3261-12E1 : Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ASTM    D 3262-11 : Standard Specification for  <span class=’unicode’>&#x201C;</span>Fiberglass<span class=’unicode’>&#x201D;</span> (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM    D 3265-14 : Standard Test Method for Carbon Black – Tint Strength
ASTM    D 3266-91(2011) : Standard Test Method for  Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
ASTM    D 3267-12 : Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
ASTM    D 3268-91(2011) : Standard Test Method for  Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
ASTM    D 3270-13 : Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
ASTM    D 3271-87(2012) : Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis
ASTM    D 3273-12 : Standard Test Method for  Resistance to Growth of Mold on the Surface of Interior Coatings in  an Environmental Chamber
ASTM    D 3274-09(2013) : Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
ASTM    D 3275-08(2013) : Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
ASTM    D 3276-07 : Standard Guide for Painting Inspectors (Metal Substrates)
ASTM    D 3278-96(2011) : Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM    D 3279-12 : Standard Test Method for n-Heptane Insolubles
ASTM    D 3280-85(2009) : Standard Test Methods for Analysis of White Zinc Pigments
ASTM    D 3282-09 : Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
ASTM    D 3283-98(2012) : Standard Specification for Air as an Electrical Insulating Material
ASTM    D 3284-05(2011) : Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
ASTM    D 3288/D 3288M-08 : Standard Test Methods for  Magnet-Wire Enamels
ASTM    D 3289-08 : Standard Test Method for  Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)
ASTM    D 3291-11 : Standard Practice for  Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
ASTM    D 3294-09 : Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes
ASTM    D 3295-06(2011) : Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
ASTM    D 3296-14 : Standard Specification for FEP-Fluorocarbon Tube
ASTM    D 3299-10 : Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM    D 3300-12 : Standard Test Method for  Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse Conditions
ASTM    D 3302/D 3302M-12 : Standard Test Method for  Total Moisture in Coal
ASTM    D 3306-14 : Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service


Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *


    Testing Needed *





    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    Telephone : (0253) 2361782
    Mobile : +91 9552508782



    [sp_faq category="19"]


    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services


    Need help or have a question? (0253) 2361782