List of ASTM Standard 8301 to 8400

ASTM    E 2864-13 : Standard Test Method for Measurement of Airborne Metal and Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM    F 2865-13 : Standard Guide for Classifying the Degrees of Ingress of Dust and Water into a Membrane Switch
ASTM    D 2865M-06 : Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
ASTM    E 2865-12 : Standard Guide for Measurement of Electrophoretic Mobility and Zeta Potential of Nanosized Biological Materials
ASTM    E 2866-12 : Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyz
ASTM    F 2866-11 : Standard Test Method for Flammability of a Membrane Switch in Defined Assembly
ASTM    D 2866-11 : Standard Test Method for Total Ash Content of Activated Carbon
ASTM    D 2867-09 : Standard Test Methods for Moisture in Activated Carbon
ASTM    E 2867-14 : Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
ASTM    F 2867-13 : Standard Terminology Relating to Thoroughbred Horse Racing Surfaces
ASTM    E 2868-13 : Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness
ASTM    D 2868-10 : Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather
ASTM    F 2868-10 : Standard Specification for Condition 2 Bicycle Frames
ASTM    F 2869-10 : Standard Practice for Radial Light Truck Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Rotating Roadwheel and a Flat Surface
ASTM    E 2869-13 : Standard Digital Reference Images for Magnesium Castings
ASTM    E 2870-13 : Standard Test Method for Evaluating Relative Effectiveness of Antimicrobial Handwashing Formulations using the Palmar Surface and Mechanical Hand Sampling
ASTM    F 2870-11 : Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
ASTM    E 2871-13 : Standard Test Method for Evaluating Disinfectant Efficacy Against Pseudomonas aeruginosa Biofilm Grown in CDC Biofilm Reactor Using Single Tube Method
ASTM    F 2871-11 : Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
ASTM    D 2872-12E1 : Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
ASTM    E 2872-14 : Standard Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus
ASTM    F 2872-11 : Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire
ASTM    F 2873-13 : Standard Practice for the Installation of Self-Leveling Underlayment and the Preparation of Surface to Receive Resilient Flooring
ASTM    F 2874-12 : Standard Specification for One Time Use Portable Emergency Fuel Containers (PEFC) for Use by Consumers
ASTM    D 2875-00(2010) : Standard Test Method for Insoluble Ash of Vegetable-Tanned Leather
ASTM    E 2875/E 2875M-12 : Standard Guide for Personal Protective Equipment for the Handling of Flat Glass
ASTM    F 2875-10 : Standard Guide for Laboratory Requirements Necessary to Test Commercial Cooking and Warming Appliances to ASTM Test Methods
ASTM    F 2876-10 : Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications
ASTM    E 2876-13 : Standard Guide for Integrating Sustainable Objectives into Cleanup
ASTM    D 2876-00(2010) : Standard Test Method for Water-Soluble Matter of Vegetable-Tanned Leather
ASTM    E 2877-12E1 : Standard Guide for Digital Contact Thermometers
ASTM    F 2877/F 2877M-13E1 : Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum
ASTM    F 2878-10 : Standard Test Method for Protective Clothing Material Resistance to Hypodermic Needle Puncture
ASTM    D 2878-10 : Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM    D 2879-10 : Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM    E 2880-14 : Standard Terminology Related to Biorationals
ASTM    F 2880-14 : Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 3⁄4 in. to 65 in.
ASTM    D 2880-13B : Standard Specification for Gas Turbine Fuel Oils
ASTM    E 2881-13 : Standard Test Method for Extraction and Derivatization of Vegetable Oils and Fats from Fire Debris and Liquid Samples with Analysis by Gas Chromatography-Mass Spectrometry
ASTM    D 2881-12 : Standard Classification for Metalworking Fluids and Related Materials
ASTM    F 2881-11 : Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM    E 2882-12 : Standard Guide for Analysis of Clandestine Drug Laboratory Evidence
ASTM    F 2882-12 : Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi Minimum Tensile Strength
ASTM    F 2882M-12 : Standard Specification for Screws, Alloy Steel, Heat Treated, 1170 Mpa Minimum Tensile Strength [Metric] ASTM    F 2883-11 : Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications
ASTM    E 2883-13 : Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME)
ASTM    D 2883-95(2009) : Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials
ASTM    E 2884-13e1 : Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays
ASTM    D 2884-93(2012) : Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method
ASTM    F 2884-12 : Standard Guide for Pre-clinical <emph type=”bdit”>in vivo</emph> Evaluation of Spinal Fusion
ASTM    E 2885-13 : Standard Specification for Handheld Point Chemical Vapor Detectors (HPCVD) for Homeland Security Applications
ASTM    D 2885-13 : Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM    F 2885-11 : Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications
ASTM    E 2886/E 2886M-14 : Standard Test Method for Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement
ASTM    F 2886-10 : Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications
ASTM    F 2887-12 : Standard Specification for Total Elbow Prostheses
ASTM    D 2887-13 : Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM    E 2888-12 : Standard Practice for Process for Inactivation of Rodent Retrovirus by Ph
ASTM    F 2888-13 : Standard Test Method for Platelet Leukocyte Count – An In-Vitro Measure for Hemocompatibility Assessment of Cardiovascular Materials
ASTM    F 2889-11 : Standard Practice for Assessing Language Proficiency
ASTM    D 2889-95(2010) : Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
ASTM    E 2889-12 : Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment
ASTM    F 2890-12 : Standard Guide for Hazard Awareness for Search and Rescue Personnel
ASTM    D 2890-92(2013) : Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
ASTM    E 2890-12 : Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method
ASTM    E 2891-13 : Standard Guide for Multivariate Data Analysis in Pharmaceutical Development and Manufacturing Applications
ASTM    F 2891-10 : Standard Specification for Commercial Bulk Milk Dispensers, Mechanically Refrigerated
ASTM    D 2892-13 : Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM    F 2892-11 : Standard Specification for Performance Requirements for Soft Toe Protective Footwear (Non-Safety / Non-Protective Toe)
ASTM    D 2893-04(2014)e1 : Standard Test Methods for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
ASTM    E 2893-13E1 : Standard Guide for Greener Cleanups
ASTM    E 2894-13 : Standard Test Method for Applying Aerosolized Bacillus Spores as Dry Inocula to Inanimate Surfaces
ASTM    F 2894-14 : Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven
ASTM    E 2895-13 : Standard Test Method for Producing High Titers of Viable and Semi-Purified Spores of Clostridium difficile using a Liquid Medium
ASTM    F 2895-10 : Standard Practice for Digital Radiography of Cast Metallic Implants
ASTM    D 2896-11 : Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid  Titration
ASTM    F 2896-11 : Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
ASTM    E 2896-12 : Standard Test Method for Quantitative Petri Plate Method (QPM) for Determining the Effectiveness of Antimicrobial Towelettes
ASTM    E 2897-12 : Standard Guide for Evaluation of the Effectiveness of Hand Hygiene Topical Antimicrobial Products using ex vivo Porcine Skin
ASTM    F 2897-11AE1 : Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)
ASTM    E 2898-14 : Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
ASTM    D 2898-10 : Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
ASTM    F 2898-11 : Standard Test Method for Permeability of Synthetic Turf Sports Field Base Stone and Surface System by Non-confined Area Flood Test Method
ASTM    E 2899-13 : Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM    F 2899-11 : Standard Specification for Condition 1 Bicycle Forks
ASTM    D 2899-12 : Standard Practice for  Establishing Allowable Stresses for Round Timber Piles
ASTM    F 2900-11 : Standard Guide for Characterization of Hydrogels used in Regenerative Medicine
ASTM    E 2900-12 : Standard Practice for Spacecraft Hardware Thermal Vacuum Bakeout
ASTM    F 2901-13 : Standard Guide for Selecting Tests to Evaluate Potential Neurotoxicity of Medical Devices
ASTM    D 2902-00(2013)E1 : Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
ASTM    F 2902-12 : Standard Guide for Assessment of Absorbable Polymeric Implants
ASTM    E 2902-12 : Standard Practice for Measurement of Body Armor Wearers
ASTM    E 2903-13 : Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes
ASTM    F 2903-11 : Standard Guide for Tissue Engineered Medical Products (TEMPs) for Reinforcement of Tendon and Ligament Surgical Repair
ASTM    D 2903-11 : Standard Specification for  Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
ASTM    F 2904-11 : Standard Specification for Warnings on Paintball Marker Accessories Used In the Sport of Paintball
ASTM    E 2904-12 : Standard Practice for Characterization and Verification of Phased Array Probes
ASTM    F 2905/ F2905M-13 : Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications
ASTM    E 2905/E 2905M-13 : Standard Practice for Examination of Mill and Kiln Girth Gear Teeth – Electromagnetic Methods
ASTM    F 2906-13 : Standard Consumer Safety Specification for Bedside Sleepers


Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *


    Testing Needed *





    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    Telephone : (0253) 2361782
    Mobile : +91 9552508782



    [sp_faq category="19"]


    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services


    Need help or have a question? (0253) 2361782