List of ASTM Standard 7501 to 7600

ASTM    D 2502-14 : Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
ASTM    F 2502-11 : Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants
ASTM    D 2503-92(2012) : Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM    F 2503-13 : Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
ASTM    E 2503-13 : Standard Practice for Qualification of Basket and Paddle Dissolution Apparatus
ASTM    D 2504-88(2010) : Standard Test Method for Noncondensable Gases in C<sub>2</sub> and Lighter Hydrocarbon Products by Gas Chromatography
ASTM    F 2504-05(2014) : Standard Practice for Describing System Output of Implantable Middle Ear Hearing Devices
ASTM    E 2505-07(2014) : Standard Practice for Industrial Rope Access
ASTM    D 2505-88(2010) : Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
ASTM    F 2505-07 : Standard Practice for Application of Federal Aviation Administration (FAA) Federal Aviation Regulations Part 21 Requirements to Unmanned Aircraft Systems (UAS)
ASTM    F 2506-13 : Standard Specification for Design and Testing of Light Sport Aircraft Propellers
ASTM    E 2506-11 : Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
ASTM    F 2507-05(2010) : Standard Specification for Recreational Airpark Design
ASTM    F 2508-13 : Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
ASTM    F 2509-12 : Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
ASTM    D 2509-03(2008) : Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)
ASTM    E 2509-08 : Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM    E 2510-07(2013) : Standard Test Method for Torque Calibration or Conformance of Rheometers
ASTM    F 2510/F 2510M-07(2013) : Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes
ASTM    D 2510-94(2012) : Standard Test Method for Adhesion of Solid Film Lubricants
ASTM    E 2511-09 : Standard Guide for Detailing of EIFS-Clad Wall Assemblies
ASTM    D 2511-93(2009) : Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants
ASTM    F 2511-05(2013) : Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
ASTM    F 2512-07 : Standard Practice for Quality Assurance in the Manufacture of Light Unmanned Aircraft System
ASTM    D 2512-95(2008) : Standard Test Method for  Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
ASTM    E 2513-07(2012) : Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems
ASTM    D 2513-14e1 : Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM    F 2514-08(2014) : Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading
ASTM    E 2514-08 : Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses
ASTM    E 2515-11 : Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
ASTM    F 2516-07e2 : Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
ASTM    E 2516-11 : Standard Classification for Cost Estimate Classification System
ASTM    D 2517-06(2011) : Standard Specification for  Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
ASTM    E 2517-13 : Standard Specification for Cargo Bed Cover, Type III (M35A2, 21⁄2 Ton Cargo Truck/ M1078, 21⁄2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 21⁄2 Ton LMTV Trailer)
ASTM    F 2517-09 : Standard Specification for Determination of Child Resistance of Portable Fuel Containers for Consumer Use
ASTM    F 2518-06 : Standard Guide for Use of a Residential Swimming Pool, Spa, and Hot Tub Safety Audit to Prevent Unintentional Drowning
ASTM    E 2518-11 : Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium  Tactical Vehicle (MTV)/ M1082, 5 Ton MTV Trailer)
ASTM    D 2518-99(2004) : Standard Specification for Woven Glass Fabrics for Electrical Insulation
ASTM    D 2519-07(2012) : Standard Test Method for  Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
ASTM    F 2519-05(2011)E1 : Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
ASTM    F 2520-05(2012) : Standard Specification for Reach-in Refrigerators, Freezers, Combination Refrigerator/Freezers, and Thaw Cabinets
ASTM    D 2520-13 : Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650°C
ASTM    E 2520-07 : Standard Practice for Verifying Minimum Acceptable Performance of Trace Explosive Detectors
ASTM    F 2521-09(2014) : Standard Specification for Heavy-Duty Ranges, Gas and Electric
ASTM    D 2521/D 2521M-76(2014)E1 : Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining
ASTM    E 2521-07a : Standard Terminology for Urban Search and Rescue Robotic Operations
ASTM    E 2522-07(2013) : Standard Guide for Quality Indicators for Health Classifications
ASTM    F 2522-12 : Standard Test Method for Determining the Protective Performance of a Shield Attached on Live Line Tools or on Racking Rods for Electric Arc Hazards
ASTM    D 2522-03(2008)e2 : Standard Test Method for  Chlorine Content of Polybutenes Used for Electrical Insulation
ASTM    F 2523-13 : Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers
ASTM    E 2523-13 : Standard Terminology for Metalworking Fluids and Operations
ASTM    D 2523-13 : Standard Practice for Testing Load-Strain Properties of Roofing Membranes
ASTM    F 2524-06(2013) : Standard Practice for Determination of Volatile Content for Formed-in-Place Gaskets (FIPG) Silicone Adhesives and Sealants for Transportation Applications
ASTM    E 2524-08(2013) : Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
ASTM    D 2524-13 : Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method—1⁄8- in. (3.2-mm) Gage Length
ASTM    E 2525-08(2013) : Standard Test Method for Evaluation of the Effect of Nanoparticulate Materials on the Formation of Mouse Granulocyte-Macrophage Colonies
ASTM    D 2525-13 : Standard Practice for Sampling Wool for Moisture
ASTM    E 2526-08(2013) : Standard Test Method for Evaluation of Cytotoxicity of Nanoparticulate Materials in Porcine Kidney Cells and Human Hepatocarcinoma Cells
ASTM    F 2527-10 : Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
ASTM    E 2527-09 : Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight
ASTM    D 2527-83(2011) : Standard Specification for  Rubber Seals&mdash;Splice Strength
ASTM    F 2528-06(2014) : Standard Test Methods for Enteral Feeding Devices with a Retention Balloon
ASTM    E 2529-06(2014) : Standard Guide for Testing the Resolution of a Raman Spectrometer
ASTM    F 2529-13 : Standard Guide for in vivo Evaluation of Osteoinductive Potential for Materials Containing Demineralized Bone (DBM)
ASTM    E 2530-06 : Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement Levels Using Si(111) Monatomic Steps
ASTM    F 2530-13 : Standard Specification for Protective Headgear with Faceguard Used in Bull Riding
ASTM    E 2531-06e1 : Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase Liquids Released to the Subsurface
ASTM    F 2531-13 : Standard Test Method for Load Capacity of Treestand Seats
ASTM    F 2532-13 : Standard Guide for Determining Net Environmental Benefit of Dispersant Use
ASTM    E 2532-09 : Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices
ASTM    D 2532-10 : Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
ASTM    E 2533-09 : Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications
ASTM    F 2533-07(2013) : Standard Guide for In-Situ Burning of Oil in Ships or Other Vessels
ASTM    D 2534-88(2012) : Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings
ASTM    E 2534-10 : Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
ASTM    F 2534-12 : Standard Guide for Visually Estimating Oil Spill Thickness on Water
ASTM    E 2535-07(2013) : Standard Guide for Handling Unbound Engineered Nanoscale Particles in Occupational Settings
ASTM    E 2536-14 : Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM    F 2536-06b(2011) : Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs
ASTM    E 2537-08 : Standard Guide for Application of Continuous Quality Verification to Pharmaceutical and Biopharmaceutical Manufacturing
ASTM    F 2537-06(2011) : Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
ASTM    F 2538-07a(2010) : Standard Practice for Design and Manufacture of Reciprocating Compression Ignition Engines for Light Sport Aircraft
ASTM    D 2538-02(2010) : Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
ASTM    E 2538-06(2011) : Standard Practice for Defining and Implementing Pharmacotherapy Information Services within the Electronic Health Record (EHR) Environment and Networked Architectures
ASTM    E 2539-12 : Standard Practice for Multiangle Color Measurement of Interference Pigments
ASTM    E 2540-08 : Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle
ASTM    E 2541-10 : Standard Guide for Stakeholder-Focused, Consensus-Based Disaster Restoration Process for Contaminated Assets
ASTM    F 2541-06 : Standard Guide for Unmanned Undersea Vehicles (UUV) Autonomy and Control
ASTM    F 2542-05(2012) : Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities
ASTM    E 2542-08(2014) : Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations
ASTM    E 2543-08(2014) : Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters
ASTM    F 2544-11 : Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
ASTM    E 2544-11a : Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM    E 2545-07(2012) : Standard Test Method for Objective Measurement of Gingival Color Using Digital Still Cameras
ASTM    F 2545-07 : Standard Guide for Unmanned Undersea Vehicle (UUV) Physical Payload Interface
ASTM    F 2546-07(2012) : Standard Test Method for Snowboard Step-in Bindings
ASTM    E 2546-07 : Standard Practice for Instrumented Indentation Testing
ASTM    F 2547-06(2013) : Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment
ASTM    E 2548-11e1 : Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis
ASTM    F 2548-12 : Standard Specification for Expanded Metal Fence Systems for Security Purposes

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST