List of ASTM Standard 7001 to 7100

ASTM    F 2268-03(2010) : Standard Specification for Bicycle Serial Numbers
ASTM    F 2269-11 : Standard Guide for Maintaining Warm Season Turfgrasses on Athletic Fields
ASTM    D 2269-10 : Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
ASTM    E 2269-14 : Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
ASTM    E 2270-13 : Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions
ASTM    E 2770-10 : Standard Guide for Operational Guidelines for Initial Response to a Suspected Biothreat Agent
ASTM    D 2270-10e1 : Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100&#176C
ASTM    F 2270-12 : Standard Guide for Construction and Maintenance of Warning Track Areas on Athletic Fields
ASTM    E 2271-05a(2012)e1 : Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities
ASTM    F 2271-11 : Standard Specification for Paintball Marker Barrel Blocking Devices
ASTM    D 2272-11 : Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
ASTM    F 2272-13 : Standard Specification for Paintball Markers
ASTM    E 2273-03(2011) : Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
ASTM    F 2273-11 : Standard Test Methods for Bicycle Forks
ASTM    D 2273-08(2012) : Standard Test Method for Trace Sediment in Lubricating Oils
ASTM    E 2274-09 : Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants
ASTM    F 2274-11 : Standard Specification for Condition 3 Bicycle Forks
ASTM    D 2274-10 : Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM    F 2275-10 : Standard Practice for Treestand Manufacturer Quality Assurance Program
ASTM    D 2275-01(2008)e1 : Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
ASTM    E 2275-13 : Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance
ASTM    E 2276-10 : Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults
ASTM    F 2076-01(2014) : Standard Practice for Communicating an EMS Patient Report to Receiving Medical Facilities
ASTM    F 2276-10 : Standard Specification for Fitness Equipment
ASTM    D 2276-06 : Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM    E 2277-14 : Standard Guide for Design and Construction of Coal Ash Structural Fills
ASTM    F 2277-12 : Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
ASTM    E 2278-13 : Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage
ASTM    F 2278-10a : Standard Test Method for Evaluating Paintball Barrier Netting
ASTM    D 2278-06 : Standard Test Method for Field Evaluation of Wood Preservatives in Round Post-Size Specimens
ASTM    F 2279-10 : Standard Practice for Quality Assurance in the Manufacture of Fixed Wing Light Sport Aircraft
ASTM    E 2279-09 : Standard Practice for Establishing the Guiding Principles of Property Management
ASTM    E 2280-13 : Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
ASTM    F 2280-12 : Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer   Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
ASTM    F 2281-04(2012) : Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
ASTM    D 2281-10 : Standard Test Method for Evaluation of Wetting Agents by the Skein Test
ASTM    E 2281-08A(2012)E1 : Standard Practice for Process and Measurement Capability Indices
ASTM    F 2282-03(2009)e1 : Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
ASTM    E 2282-13 : Standard Guide for Defining the Test Result of a Test Method
ASTM    F 2283-12 : Standard Specification for Shipboard Oil Pollution Abatement System
ASTM    E 2283-08 : Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
ASTM    D 2284-11 : Standard Test Method for Acidity of Sulfur Hexafluoride
ASTM    E 2285-08 : Standard Guide for Examination of Mechanical Checkwriter Impressions
ASTM    F 2285-04(2010) : Standard Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use
ASTM    F 2286-05(2013) : Standard Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas
ASTM    E 2286-08a : Standard Guide for Examination of Dry Seal Impressions
ASTM    D 2287-12 : Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
ASTM    E 2287-09 : Standard Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and Typed Text
ASTM    E 2288-09 : Standard Guide for Physical Match of Paper Cuts, Tears, and Perforations in Forensic Document Examinations
ASTM    E 2289-08 : Standard Guide for Examination of Rubber Stamp Impressions
ASTM    D 2290-12 : Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM    E 2290-07a : Standard Guide for Examination of Handwritten Items
ASTM    F 2291-14 : Standard Practice for Design of Amusement Rides and Devices
ASTM    D 2291-09 : Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
ASTM    F 2292-03(2008) : Standard Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers Utilizing Four Different Test Methods<span class=’unicode’>&#x2014;</span>Drip, Spray, Submersion and Rub
ASTM    E 2292-04(2012) : Standard Practice for Investigation of Investigating Carbon Monoxide Poisoning Incidents
ASTM    E 2293-03(2013) : Standard Practice for Drying of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials for the Determination of Mercury
ASTM    F 2293-03(2008) : Standard Practice for Determining the Stain Resistance of Images Produced by Ink Jet Printers
ASTM    D 2293-96(2008) : Standard Test Method for  Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
ASTM    E 2294-03(2013) : Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry
ASTM    F 2294-03(2009) : Standard Practice for Determining the Writeability of Print Media
ASTM    D 2294-96(2008) : Standard Test Method for  Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM    E 2295-13 : Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels
ASTM    D 2295-96(2008) : Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated   Temperatures (Metal-to-Metal)
ASTM    F 2295-10 : Standard Practice for Continued Operational Safety Monitoring of a Light Sport Aircraft
ASTM    D 2296-01(2006) : Standard Specification for Continuity of Quality of Electrical Insulating Polybutene Oil for Capacitors
ASTM    F 2296-04(2012) : Standard Practice for Determining the Adhesion of Lamination Films to Prints Utilizing Mechanical Stress: Four Different Test Methods— Score/Tape, Cross Hatch, X-Cut, and Crease-Folding
ASTM    E 2296-03(2013) : Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry
ASTM    E 2297-04(2010) : Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
ASTM    E 2298-13A : Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM    F 2298-03(2009)e1 : Standard Test Methods for Water Vapor Diffusion Resistance and Air Flow Resistance of Clothing Materials Using the Dynamic Moisture Permeation Cell
ASTM    E 2299-13 : Standard Guide for Sensory Evaluation of Products by Children and Minors
ASTM    F 2299/F 2299M-03(2010) : Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
ASTM    E 2300-09 : Standard Specification for Highway Traffic Monitoring Devices
ASTM    F 2300-10 : Standard Test Method for Measuring the Performance of Personal Cooling Systems Using Physiological Testing
ASTM    D 2300-08 : Standard Test Method for  Gassing of Electrical Insulating Liquids Under Electrical Stress and Ionization (Modified Pirelli Method)
ASTM    E 2301-12 : Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry
ASTM    D 2301-10 : Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM    E 2302-03a(2009) : Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer
ASTM    F 2302-08 : Standard Performance Specification for Labeling Protective Clothing as Heat and Flame Resistant
ASTM    D 2303-13 : Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
ASTM    F 2303-03(2009) : Standard Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits
ASTM    E 2303-11E1 : Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
ASTM    E 2304-03(2011) : Standard Practice for Use of a LiF Photo-Fluorescent Film Dosimetry System
ASTM    F 2304-10 : Standard Practice for Sealing of Sewers Using Chemical Grouting
ASTM    D 2304-10 : Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
ASTM    D 2305-10 : Standard Test Methods for Polymeric Films Used for Electrical Insulation
ASTM    F 2306/F 2306M-13 : Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile- Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
ASTM    E 2306-13 : Standard Practice for Disposal of Personal Property
ASTM    E 2307-10 : Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus
ASTM    D 2307-07A(2013) : Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
ASTM    D 2308-07(2013) : Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
ASTM    E 2309/E 2309M-05(2011)e1 : Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
ASTM    E 2310-04(2009) : Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded  Using Mid-Infrared Spectroscopy
ASTM    D 2310-06(2012) : Standard Classification for Machine-Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM    F 2311-08 : Standard Guide for Classification of Therapeutic Skin Substitutes
ASTM    E 2311-04(2009) : Standard Practice for QCM Measurement of Spacecraft Molecular Contamination in Space
ASTM    F 2312-11 : Standard Terminology Relating to Tissue Engineered Medical Products
ASTM    E 2312-11 : Standard Practice for Tests of Cleanroom Materials
ASTM    E 2313-08 : Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (Spectrophotometric Method)

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST