List of ASTM Standard 6601 to 6700

ASTM    D 2097-03(2010) : Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM    E 2098/E 2098M-13 : Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
ASTM    F 2098-08 : Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings
ASTM    D 2098-13 : Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Dow Corning Leather Tester
ASTM    F 2099-01(2014) : Standard Guide for Use of Universal Transverse Mercator (UTM) Grids When Preparing and Using a Field Map for Land Search
ASTM    E 2099-00(2014)e1 : Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
ASTM    D 2099-14 : Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
ASTM    F 2100-11 : Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM    D 2100/D 2100M-95(2009)e1 : Standard Specification for Asbestos Textiles Used for Electrical Insulating Purposes
ASTM    E 2100-04(2010) : Standard Practice for Calculating the International Runway Friction Index
ASTM    F 2101-07 : Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of <i>Staphylococcus aureus</i>
ASTM    D 2102-02(2012)e1 : Standard Test Method for  Shrinkage of Textile Fibers (Bundle Test)
ASTM    F 2102-13 : Standard Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants
ASTM    E 2102-14 : Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM    D 2103-10 : Standard Specification for Polyethylene Film and Sheeting
ASTM    E 2103/E 2103M-13 : Standard Classification for Bridge Elements – UNIFORMAT II
ASTM    F 2103-11 : Standard Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Product Applications
ASTM    E 2104-09 : Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components
ASTM    F 2105-11 : Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
ASTM    E 2105-00(2010) : Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
ASTM    D 2105-01(2014) : Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM    F 2106-12 : Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills
ASTM    D 2106-07(2012) : Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
ASTM    E 2106-00(2011) : Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
ASTM    E 2107-06(2014) : Standard Practice for Environmental Regulatory Compliance Audits
ASTM    F 2107-08 : Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields
ASTM    E 2108-10 : Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
ASTM    D 2108-10 : Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale)
ASTM    F 2108-06(2011) : Standard Practice for Inspection of Transparent Parts by Prism
ASTM    F 2109-01(2011) : Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces
ASTM    D 2109-01(2011) : Standard Test Methods for Nonvolatile Matter in Halogenated Organic<br>  Solvents and Their Admixtures
ASTM    E 2109-01(2007) : Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
ASTM    D 2110-00 (Reapproved 2012) : Standard Test Method for Ph of Water Extractions of Halogenated Organic Solvents and Their Admixtures
ASTM    E 2110-11 : Standard Terminology for  Exterior Insulation and Finish Systems (EIFS)
ASTM    D 2111-10 : Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures
ASTM    F 2111-01a(2011) : Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM    E 2111-12 : Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals
ASTM    E 2112-07 : Standard Practice for Installation of Exterior Windows, Doors and Skylights
ASTM    D 2112-01a(2007) : Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel
ASTM    F 2112-02(2011) : Standard Terminology for Membrane Switches
ASTM    D 2113-08 : Standard Practice for  Rock Core Drilling and Sampling of Rock for Site Investigation
ASTM    F 2113-01(2011) : Standard Guide for Analysis and Reporting the Impurity Content and Grade of High Purity Metallic Sputtering Targets for Electronic Thin Film Applications
ASTM    E 2113-13 : Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM    E 2114-08 : Standard Terminology for Sustainability Relative to the Performance of Buildings
ASTM    D 2115-10 : Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions
ASTM    F 2115-12 : Standard Specification for Motorized Treadmills
ASTM    E 2115-06 : Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
ASTM    F 2116-01(2007) : Standard Specification for Low Stretch and Static Kernmantle Life Safety Rope
ASTM    D 2116-07 (Reapproved 2012) : Standard Specification for FEP-Fluorocarbon Molding and Extrusion Materials
ASTM    F 2117-10 : Standard Test Method for Vertical Rebound Characteristics of Sports Surface/Ball Systems; Acoustical Measurement
ASTM    E 2117-06(2011) : Standard Guide for Identification and Establishment of a Quality Assurance Program for Medical Transcription
ASTM    D 2118-05(2009) : Standard Practice for Assigning a Standard Commercial Moisture Content for Wool and its’ Products
ASTM    F 2118-10 : Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials
ASTM    F 2119-07(2013) : Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants
ASTM    D 2119-09 : Standard Test Method for Aldehydes in Styrene Monomer
ASTM    E 2120-10 : Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
ASTM    F 2120-06(2010) : Standard Practice for Testing Treestand Load Capacity
ASTM    E 2121-13 : Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
ASTM    F 2121-13 : Standard Practice for Treestand Labels
ASTM    D 2121-07 : Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)
ASTM    D 2122-98(2010) : Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
ASTM    F 2122-13 : Standard Practice for Treestand Safety Devices
ASTM    E 2122-02(2013) : Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves
ASTM    F 2123-13 : Standard Practice for Treestand Instructions
ASTM    E 2123-10 : Standard Practice for the Transmittal of Evidence in Sexual Assault Investigation
ASTM    D 2124-99(2011) : Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM    F 2124-13 : Standard Practice for Testing Treestand Ladder, Tripod Stand and Climbing Stick Load Capacity
ASTM    E 2124-10 : Standard Practice for the Specification for Equipment and Supplies in Sexual Assault Investigations
ASTM    F 2125-09(2013) : Standard Test Method for Treestand Static Stability and Adherence
ASTM    E 2125-11 : Standard Guide for Microcrystal Testing in the Forensic Analysis of Phencyclidine and Its Analogues
ASTM    F 2126-06(2010) : Standard Test Method for Treestand Static Load Capacity
ASTM    E 2126-11 : Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
ASTM    D 2126-09 : Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM    E 2127-01a(2007) : Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
ASTM    F 2128-13 : Standard Test Method for Treestand Repetitive Loading Capability
ASTM    E 2128-12 : Standard Guide for Evaluating Water Leakage of Building Walls
ASTM    D 2129-05(2010) : Standard Test Method for Color of Clear Electrical Insulating Liquids (Platinum-Cobalt Scale)
ASTM    E 2129-10 : Standard Practice for Data Collection for Sustainability Assessment of Building Products
ASTM    F 2129-08 : Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
ASTM    F 2130-11 : Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials
ASTM    D 2130-13 : Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection
ASTM    E 2131-09 : Standard Practice For Addressing and Reporting Loss, Damage, or Destruction of Tangible Property
ASTM    F 2131-02(2012) : Standard Test Method for In Vitro Biological Activity of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) Using the W-20 Mouse Stromal Cell Line
ASTM    D 2131-97(2008)e1 : Standard Classification for  Natural Muscovite Mica Splittings
ASTM    E 2132-11 : Standard Practice for Inventory Verification: Electronic and Physical Inventory of Assets
ASTM    D 2132-12 : Standard Test Method for  Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
ASTM    F 2132-01(2008)e1 : Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps
ASTM    E 2133-03(2013) : Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface
ASTM    E 2134/E 2134M-14 : Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
ASTM    D 2134-93(2012) : Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
ASTM    F 2135-01(2012) : Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
ASTM    E 2135-10AE1 : Standard Terminology for Property and Asset Management
ASTM    F 2136-08 : Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
ASTM    E 2136-04(2013) : Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings – Durability
ASTM    D 2136-02(2012) : Standard Test Method for Coated Fabrics – Low-Temperature Bend Test
ASTM    E 2137-06(2011) : Standard Guide for Estimating Monetary Costs and Liabilities for Environmental Matters
ASTM    D 2137-11 : Standard Test Methods for  Rubber Property<char: emdash>Brittleness Point of Flexible Polymers and Coated Fabrics
ASTM    F 2137-13 : Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices
ASTM    F 2138-12 : Standard Specification for Excess Flow Valves for Natural Gas Service
ASTM    E 2139-05(2011) : Standard Test Method for Same-Different Test


Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *


    Testing Needed *





    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    Telephone : (0253) 2361782
    Mobile : +91 9552508782



    [sp_faq category="19"]


    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services


    Need help or have a question? (0253) 2361782