List of ASTM Standard 5601 to 5700

ASTM    C 1674-11 : Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
ASTM    F 1674-11 : Standard Test Method for Joint Restraint Products for Use with PVC Pipe
ASTM    C 1675-11 : Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
ASTM    E 1675-04(2012) : Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
ASTM    D 1675-03(2011) : Standard Test Methods for  Polytetrafluoroethylene Tubing
ASTM    F 1675-13 : Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
ASTM    C 1676-08 : Standard Specification for Microporous Thermal Insulation
ASTM    D 1676-03(2011) : Standard Test Methods for Film-Insulated Magnet Wire
ASTM    E 1676-12 : Standard Guide for Conducting Laboratory Soil Toxicity or Bioaccumulation Tests with the Lumbricid Earthworm Eisenia Fetida and the Enchytraeid Potworm Enchytraeus albidus
ASTM    C 1677-11a : Standard Specification for Joints for Concrete Box, Using Rubber Gaskets
ASTM    E 1677-11 : Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls
ASTM    D 1677-02(2011) : Standard Methods for  Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
ASTM    C 1678-10 : Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses
ASTM    E 1678-10 : Standard Test Method for  Measuring Smoke Toxicity for Use in Fire Hazard Analysis
ASTM    E 1679-13 : Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed
ASTM    C 1679-14 : Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
ASTM    F 1680-07a(2014) : Standard Test Method for Determining Circuit Resistance of a Membrane Switch
ASTM    E 1680-11 : Standard Test Method for  Rate of Air Leakage Through Exterior Metal Roof Panel Systems
ASTM    F 1681-14 : Standard Test Method for Determining Current Carrying Capacity of a Membrane Switch Circuit
ASTM    C 1681-14 : Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
ASTM    D 1681-05(2014) : Standard Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure
ASTM    E 1681-03(2013) : Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM    C 1682-09 : Standard Guide for Characterization of Spent Nuclear Fuel in Support of Geologic Repository  Disposal
ASTM    E 1682-08(2013) : Standard Guide for Modeling the Colorimetric Properties of a CRT-Type Visual Display Unit
ASTM    F 1683-09 : Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component
ASTM    D 1683/D 1683M-11a : Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics
ASTM    E 1683-02(2014)e1 : Standard Practice for Testing the Performance of Scanning Raman Spectrometers
ASTM    C 1683-10 : Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
ASTM    E 1684-10 : Standard Specification for Miniature Thermocouple Connectors
ASTM    C 1684-13E1 : Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature – Cylindrical Rod Strength
ASTM    F 1684-06(2011) : Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
ASTM    D 1684-07(2012) : Standard Practice for Lighting Cotton Classing Rooms for Color Grading
ASTM    F 1685-00(2013) : Standard Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems
ASTM    E 1685-13 : Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique
ASTM    C 1685-08 : Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation  for  Industrial Applications
ASTM    C 1686-09 : Standard Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units
ASTM    E 1686-10 : Standard Guide for Applying Environmental Noise Measurement Methods and Criteria
ASTM    F 1686-09e1 : Standard Guide for Surveys to Document and Assess Oiling Conditions on Shorelines
ASTM    D 1686-10 : Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
ASTM    E 1687-10 : Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids
ASTM    D 1687-12 : Standard Test Methods for Chromium in Water
ASTM    F 1687-09 : Standard Guide for Terminology and Indices to Describe Oiling Conditions on Shorelines
ASTM    E 1688-10 : Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates
ASTM    C 1688/C 1688M-14 : Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete
ASTM    D 1688-12 : Standard Test Methods for Copper in Water
ASTM    C 1689-08A(2014) : Standard Practice for Subsampling of Uranium Hexafluoride
ASTM    F 1689-05(2012) : Standard Test Method for  Determining the Insulation Resistance of a Membrane Switch
ASTM    E 1689-95(2014) : Standard Guide for Developing Conceptual Site Models for Contaminated Sites
ASTM    E 1690-08 : Standard Test Method for  Determination of Ethanol Extractives in Biomass
ASTM    D 1691-12 : Standard Test Methods for Zinc in Water
ASTM    C 1691-11 : Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
ASTM    F 1692-01(2011) : Standard Test Method for  Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems
ASTM    E 1692-95a(2012) : Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
ASTM    C 1692-11 : Standard Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry
ASTM    F 1693-13 : Standard Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land
ASTM    E 1693-95 (Reapproved 2012) : Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
ASTM    C 1693-11 : Standard Specification for Autoclaved Aerated Concrete (AAC)
ASTM    D 1693-13 : Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM    C 1694-09 : Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements
ASTM    E 1694-95a(2012) : Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
ASTM    F 1694-09 : Standard Guide for  Composing Walkway Surface Investigation, Evaluation and Incident Report Forms for Slips, Stumbles, Trips, and Falls
ASTM    F 1695-03(2008) : Standard Test Method for Performance of Underfired Broilers
ASTM    E 1695-95(2013) : Standard Test Method for Measurement of Computed Tomography (CT) System Performance
ASTM    C 1695-10 : Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service
ASTM    D 1695-07(2012) : Standard Terminology of Cellulose and Cellulose Derivatives
ASTM    D 1696-95(2011) : Standard Test Method for Solubility of Cellulose in Sodium Hydroxide
ASTM    F 1696-07 : Standard Test Method for Energy Performance of Single-Rack, Door-Type Commercial Dishwashing Machines
ASTM    C 1696-14 : Standard Guide for Industrial Thermal Insulation Systems
ASTM    F 1697-09 : Standard Specification for  Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit  <a href=”#fn00002″></a>
ASTM    C 1697-10 : Standard Specification for Blended Supplementary Cementitious Materials
ASTM    E 1697-05(2012)e1 : Standard Test Method for Unipolar Magnitude Estimation of Sensory Attributes
ASTM    E 1698-95(2010) : Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography
ASTM    C 1698-09 : Standard Test Method for Autogenous Strain of Cement Paste and Mortar
ASTM    F 1698-02(2008) : Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
ASTM    E 1699-14 : Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes
ASTM    F 1699-96(2008) : Standard Classification for Passive Fiber Optic Seals
ASTM    C 1699-09 : Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM    F 1700-13A : Standard Specification for Solid Vinyl Floor Tile
ASTM    E 1700-13 : Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope
ASTM    F 1701-12 : Standard Specification for  Unused Rope with Special Electrical Properties
ASTM    C 1701/C 1701M-09 : Standard Test Method for Infiltration Rate of In Place Pervious Concrete
ASTM    E 1701-95 (Reapproved 2012) : Standard Classification for Serviceability of an Office Facility for Manageability
ASTM    F 1702-10 : Standard Test Method for  Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus
ASTM    C 1702-13A : Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM    F 1703-13 : Standard Guide for Skating and Ice Hockey Playing Facilities
ASTM    C 1703-08 : Standard Practice for Sampling of Gaseous Uranium Hexafluoride
ASTM    E 1703/E 1703M-10 : Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
ASTM    C 1704/C 1704M-09a : Standard Test Method for Sampling and Testing Structural Cementitious Panels
ASTM    F 1704-12 : Standard Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems
ASTM    E 1704-95(2010) : Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
ASTM    F 1705-96(2012) : Standard Guide for Training Emergency Medical Services Ambulance Operations
ASTM    C 1705/C 1705M-09 : Standard Specification for Structural Cementitious Panels
ASTM    E 1705-13 : Standard Terminology Relating to Biotechnology
ASTM    E 1706-05(2010) : Standard Test Method for  Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates
ASTM    C 1707-11 : Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes
ASTM    E 1708-14 : Standard Practice for Electronic Interchange of Color and Appearance Data
ASTM    C 1708/C 1708M-13 : Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements
ASTM    D 1708-13 : Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM    F 1709-97(2008) : Standard Specification for  High Purity Titanium Sputtering Targets for Electronic Thin Film Applications
ASTM    D 1709-09 : Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST