List of ASTM Standard 3501 to 3600

ASTM    C 965-96(2012) : Standard Practice for  Measuring Viscosity of Glass Above the Softening Point
ASTM    E 965-96(2006) : Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM    B 965-09 : Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
ASTM    C 966-98(2008) : Standard Guide for  Installing Asbestos-Cement Nonpressure Pipe
ASTM    A 966/A 966M-08(2012) : Standard Practice for  Magnetic Particle Examination of Steel Forgings Using Alternating Current
ASTM    B 966-10 : Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas
ASTM    E 966-10e1 : Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements
ASTM    E 967-08(2014) : Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM    A 967/A 967M-13 : Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
ASTM    C 967-13 : Standard Specification for Uranium Ore Concentrate
ASTM    F 967-03(2011) : Standard Practice for Security Engineering Symbols
ASTM    B 967/B 967M-12 : Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
ASTM    C 968-12 : Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets
ASTM    B 968/B 968M-10 : Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
ASTM    E 968-02(2014) : Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM    A 968/A 968M-96(2014) : Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
ASTM    D 968-05(2010) : Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
ASTM    C 969-02(2009) : Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
ASTM    F 969-11 : Standard Practice for Construction of Chain-Link Tennis Court Fence
ASTM    C 969M-02(2009) : Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
ASTM    B 969/B 969M-11 : Standard Specification for Aluminum-Alloy Castings Produced by the Squeeze Casting, Thixocast and Rheocast Semi-Solid Casting Processes
ASTM    E 969-02(2012) : Standard Specification for Glass Volumetric (Transfer) Pipets
ASTM    B 970-09 : Standard Test Method for Cleanliness of Powder Metallurgy (PM) Bearings and Structural Parts
ASTM    F 970-07(2011) : Standard Test Method for Static Load Limit
ASTM    E 970-14 : Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
ASTM    A 970/A 970M-13A : Standard Specification for Headed Steel Bars for Concrete Reinforcement
ASTM    A 971/A 971M-10 : Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
ASTM    E 971-11 : Standard Practice for  Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
ASTM    B 971-10 : Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
ASTM    D 971-12 : Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method
ASTM    E 972-96(2013) : Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight
ASTM    B 972-10 : Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application
ASTM    C 972-00(2011) : Standard Test Method for Compression-Recovery of Tape Sealant
ASTM    D 972-02(2008) : Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
ASTM    A 972/A 972M-00(2010) : Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
ASTM    C 973-87(2009) : Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
ASTM    A 973/A 973M-07(2012) : Standard Specification for Grade 100 Alloy Steel Chain
ASTM    E 973-10 : Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
ASTM    B 973-10 : Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
ASTM    C 974-87(2009) : Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
ASTM    B 974/B 974M-12 : Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire
ASTM    A 974-97(2011) : Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
ASTM    F 974-06(2011)e1 : Standard Practice for  Determination of Color Response of Electrostatic Copying System, Black and White Output
ASTM    E 974-00(2006) : Standard Guide for Specifying Thermal Performance of Geothermal Power Systems
ASTM    D 974-12 : Standard Test Method for Acid and Base Number by Color-Indicator Titration
ASTM    D 975-14 : Standard Specification for Diesel Fuel Oils
ASTM    C 975-87(2009) : Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
ASTM    A 975-11 : Standard Specification for Double<span class=’unicode’>&#x2013;</span>Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
ASTM    E 975-13 : Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation
ASTM    E 976-10 : Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response
ASTM    B 976-11 : Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR)
ASTM    D 976-06(2011) : Standard Test Method for Calculated Cetane Index of Distillate Fuels
ASTM    F 976-08 : Standard Specification for  Portable Kerosene and Diesel Containers for Consumer Use
ASTM    A 976-13 : Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application
ASTM    A 977/A 977M-07(2013) : Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM    C 977-10 : Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
ASTM    B 977-13 : Standard Specification for Titanium and Titanium Ingots
ASTM    D 977-13E1 : Standard Specification for Emulsified Asphalt
ASTM    F 977-12 : Standard Consumer Safety Specification for Infant Walkers
ASTM    E 977-05(2014) : Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
ASTM    B 978/B 978M-14 : Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Composite Reinforced (ACCR)
ASTM    A 978/A 978M-08(2013) : Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
ASTM    C 978-04(2014) : Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
ASTM    B 979-12 : Standard Specification for Non-Specular (NS) Surface Finish on Overhead Aluminum Electrical Conductors
ASTM    C 979/C 979M-10 : Standard Specification for Pigments for Integrally Colored Concrete
ASTM    E 979-09 : Standard Test Method for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids
ASTM    A 979/A 979M-03(2009) : Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
ASTM    D 979/D 979M-12 : Standard Practice for  Sampling Bituminous Paving Mixtures
ASTM    C 980-13A : Standard Specification for Industrial Chimney Lining Brick
ASTM    F 980-10 : Standard Guide for Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices
ASTM    A 980/A 980M-11 : Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
ASTM    F 981-04(2010) : Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone
ASTM    A 981/A 981M-11 : Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm]  Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
ASTM    E 981-04(2012) : Standard Test Method for Estimating Sensory Irritancy of Airborne Chemicals
ASTM    C 981-05(2013) : Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
ASTM    B 981/B 981M-12 : Standard Specification for Low Leaded Brass Rod, Bar and Shapes
ASTM    E 982-94(2009) : Standard Specification for Laboratory Glass Test Tubes
ASTM    B 982-12 : Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric OR ICP Analysis
ASTM    D 982-05(2009) : Standard Test Method for Organic Nitrogen in Paper and Paperboard
ASTM    F 982-86(2008) : Standard Specification for  Disclosure of Characteristics of Surgically Implanted Clamps for Carotid Occlusion
ASTM    A 982/A 982M-10 : Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
ASTM    F 983-86(2013) : Standard Practice for Permanent Marking of Orthopaedic Implant Components
ASTM    A 983/A 983M-06(2011)E1 : Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM    B 983-13A : Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube
ASTM    E 983-10 : Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy
ASTM    E 984-12 : Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy
ASTM    B 984-12 : Standard Specification for Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use
ASTM    C 985M-13 : Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM    A 985/A 985M-13 : Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
ASTM    B 985-12 : Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis
ASTM    E 985-00(2006) : Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
ASTM    C 985-13 : Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
ASTM    F 985-00(2012) : Standard Specification for Panama Canal Pilot Platform
ASTM    F 986-86(2008) : Standard Specification for Suction Strainer Boxes
ASTM    B 986-13E1 : Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application
ASTM    A 986/A 986M-01(2011) : Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
ASTM    E 986-04(2010) : Standard Practice for Scanning Electron Microscope Beam Size Characterization
ASTM    C 987-10 : Standard Test Method for Vapor Attack on Refractories for Furnace Superstructures
ASTM    F 987-04(2010) : Standard Specification for Portable Intermediate Flush Deck Stanchion
ASTM    E 987-88(2009) : Standard Test Methods for Deglazing Force of Fenestration Products

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST