List of ASTM Standard 3401 to 3500

ASTM    A 942/A 942M-95(2012)E1 : Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells
ASTM    A 943/A 943M-01(2014) : Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
ASTM    D 943-04a(2010)e1 : Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
ASTM    E 943-08 : Standard Terminology Relating to Biological Effects and Environmental Fate
ASTM    C 943-10 : Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
ASTM    B 943-13 : Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
ASTM    A 944-10 : Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM    B 944-11 : Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
ASTM    C 944/C 944M-12 : Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
ASTM    E 944-13 : Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance, E 706 (IIA)
ASTM    B 945-06 : Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
ASTM    E 945-12 : Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry
ASTM    D 945-06(2012) : Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM    A 945/A 945M-06(2011) : Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
ASTM    F 945-12 : Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
ASTM    C 945-05(2012) : Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
ASTM    C 946-10 : Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls
ASTM    B 946-11 : Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products
ASTM    D 946/D 946M-09a : Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction
ASTM    F 946-85(2010) : Standard Guide for Establishing Security Seal Control and Accountability Procedures
ASTM    C 947-03(2009) : Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM    E 947-83(2007) : Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM    A 947M-13 : Standard Specification for Textured Stainless Steel Sheet [Metric] ASTM    B 947-06(2013) : Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
ASTM    E 948-09 : Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM    F 948-94(2011) : Standard Test Method for  Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM    C 948-81(2009) : Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
ASTM    B 949-13 : Standard Specification for General Requirements for Zinc and Zinc Alloy Products
ASTM    C 949-80(2012) : Standard Test Method for  Porosity  in  Vitreous  Whitewares  by  Dye  Penetration
ASTM    F 949-10 : Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
ASTM    A 949/A 949M-01(2014) : Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
ASTM    B 950-13 : Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
ASTM    C 950/C 950M-08(2012) : Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
ASTM    D 950-03(2011) : Standard Test Method for Impact Strength of Adhesive Bonds
ASTM    E 950/E 950M-09 : Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
ASTM    A 950/A 950M-11 : Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
ASTM    D 951-99(2010) : Standard Test Method for Water Resistance of Shipping Containers by Spray Method
ASTM    A 951/A 951M-14 : Standard Specification for Steel Wire for Masonry Joint Reinforcement
ASTM    E 951-94(2006) : Standard Test Methods for Laboratory Testing of Non-Commercial Mosquito Repellent Formulations On the Skin
ASTM    B 951-11 : Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
ASTM    D 952-10 : Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM    F 952-12 : Standard Specification for Mixing Machines, Food, Electric
ASTM    C 952-12 : Standard Test Method for Bond Strength of Mortar to Masonry Units
ASTM    B 952/B 952M-13 : Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
ASTM    A 952/A 952M-02(2010) : Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
ASTM    D 953-10 : Standard Test Method for Bearing Strength of Plastics
ASTM    F 953-14 : Standard Specification for Commercial Dishwashing Machines (Stationary Rack, Dump Type) Chemical Sanitizing
ASTM    E 953/E 953M-08 : Standard Test Method for Fusibility of Refuse-Derived Fuel (RDF) Ash
ASTM    C 953-10 : Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM    B 953-13 : Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
ASTM    C 954-11 : Standard Specification for  Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84  mm) in Thickness
ASTM    B 954-07 : Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
ASTM    A 955/A 955M-14 : Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
ASTM    B 955/B 955M-11 : Standard Specification for Aluminum-Alloy Centrifugal Castings
ASTM    C 955-11c : Standard Specification for  Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks),  and Bracing or Bridging for Screw Application of Gypsum Panel Products and   Metal Plaster Bases
ASTM    E 955-88(2009)e1 : Standard Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples
ASTM    F 955-07 : Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances
ASTM    D 955-08 : Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
ASTM    C 956-04(2010) : Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
ASTM    B 956/B 956M-10E1 : Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
ASTM    F 956-91(2012) : Standard Specification for  Bell, Cast, Sound Signalling
ASTM    A 956-12 : Standard Test Method for Leeb Hardness Testing of Steel Products
ASTM    E 956-83(2010) : Standard Classification for Municipal-Mixed Nonferrous Metals (MNM)
ASTM    A 957/A 957M-13 : Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
ASTM    D 957-12 : Standard Practice for Determining Surface Temperature of Molds for Plastics
ASTM    B 957/B 957M-08E1 : Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors
ASTM    F 957-91(2012) : Standard Specification for  Gong, Sound Signaling
ASTM    E 957-03(2011)e1 : Standard Terminology Relating to Geothermal Energy
ASTM    C 957/C 957M-10 : Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
ASTM    A 958/A 958M-14 : Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
ASTM    B 958/B 958M-08E1 : Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
ASTM    E 958-13 : Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM    C 958-92(2014) : Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
ASTM    A 959-11 : Standard Guide for  Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
ASTM    F 959-13 : Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
ASTM    E 959-83(2010) : Standard Test Method for Characterizing the Performance of Refuse Size-Reduction Equipment
ASTM    F 959M-13 : Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners (Metric)
ASTM    E 960-93(2013) : Standard Specification for Laboratory Glass Beakers
ASTM    B 960-13 : Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc
ASTM    A 960/A 960M-13 : Standard Specification for Common Requirements for Wrought Steel Piping Fittings
ASTM    E 961-97(2013) : Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Reusable
ASTM    C 961-06(2011) : Standard Test Method for Lap Shear Strength of Sealants
ASTM    F 961-08 : Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
ASTM    A 961/A 961M-13 : Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
ASTM    B 961-13 : Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application
ASTM    F 962-04(2010) : Standard Specification for Oil Spill Response Boom Connection: Z-Connector
ASTM    A 962/A 962M-14 : Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM    D 962-81(2008)e1 : Standard Specification for  Aluminum Powder and Paste Pigments for Paints
ASTM    B 962-13 : Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
ASTM    F 963-11 : Standard Consumer Safety Specification for Toy Safety
ASTM    E 963-95(2010) : Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte
ASTM    B 963-13 : Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
ASTM    C 963-00(2012) : Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
ASTM    C 964-07(2012) : Standard Guide for Lock-Strip Gasket Glazing
ASTM    F 964-13 : Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
ASTM    E 964-06(2010) : Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
ASTM    B 964-09 : Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
ASTM    A 964/A 964M-03(2011) : Standard Specification for Corrugated Steel Box Culverts
ASTM    D 964-03(2008)e1 : Standard Specification for  Metallic Copper Powder for Use in Antifouling Paints
ASTM    A 965/A 965M-13 : Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts


Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *


    Testing Needed *





    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    Telephone : (0253) 2361782
    Mobile : +91 9552508782



    [sp_faq category="19"]


    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services


    Need help or have a question? (0253) 2361782