List of ASTM Standard 2801 to 2900

ASTM    A 803/A 803M-12 : Standard Specification for  Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
ASTM    B 804-02(2013) : Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
ASTM    A 804/A 804M-04(2009)e1 : Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
ASTM    D 804-12 : Standard Terminology Relating to Pine Chemicals, Including Tall Oil and Related Products
ASTM    B 805-06(2011) : Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
ASTM    E 805-12a : Standard Practice for Identification of Instrumental Methods of Color or Color- Difference Measurement of Materials
ASTM    C 805/C 805M-13A : Standard Test Method for Rebound Number of Hardened Concrete
ASTM    A 805/A 805M-09 : Standard Specification for  Steel, Flat Wire, Carbon, Cold-Rolled
ASTM    D 806-11 : Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures
ASTM    F 806-99a(2009) : Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
ASTM    B 806-14 : Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
ASTM    C 806-12 : Standard Test Method for Restrained Expansion of Expansive Cement Mortar
ASTM    E 806-08 : Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)
ASTM    A 807/A 807M-13 : Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
ASTM    C 807-13 : Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
ASTM    B 807/B 807M-13 : Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
ASTM    D 807-14 : Standard Practice for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM1 Embrittlement Detector Method)
ASTM    F 807-83(2009) : Standard Practice for Determining Resolution Capability of Office Copiers
ASTM    C 808-75(2010)e1 : Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
ASTM    D 808-11 : Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)
ASTM    B 808-10 : Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
ASTM    E 808-01(2009) : Standard Practice for Describing Retroreflection
ASTM    C 809-13 : Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and Aluminum Oxide-Boron Carbide Composite Pellets
ASTM    A 809-08(2013) : Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
ASTM    B 809-95(2013) : Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)
ASTM    E 809-08 : Standard Practice for Measuring Photometric Characteristics of Retroreflectors
ASTM    A 810-01(2009)e1 : Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
ASTM    F 810-12 : Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
ASTM    B 810-01a(2011) : Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ASTM    C 810-90(2011)e1 : Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
ASTM    E 810-03(2013) : Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
ASTM    B 811-13 : Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
ASTM    A 811-03(2008) : Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques
ASTM    E 811-09 : Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
ASTM    F 811-02(2010) : Standard Practice for Accelerometer Use in Vehicles for Tire Testing
ASTM    B 812-96(2013) : Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
ASTM    F 812-12 : Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
ASTM    A 813/A 813M-09 : Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
ASTM    B 813-10 : Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
ASTM    D 813-07 : Standard Test Method for Rubber Deterioration-Crack Growth
ASTM    C 813-90(2009) : Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
ASTM    F 813-07(2012) : Standard Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices
ASTM    E 814-13A : Standard Test Method for Fire Tests of Penetration Firestop Systems
ASTM    D 814-95(2010) : Standard Test Method for Rubber Property- Vapor Transmission of Volatile Liquids
ASTM    B 814-06(2011) : Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
ASTM    A 814/A 814M-08 : Standard Specification for  Cold-Worked Welded Austenitic Stainless Steel Pipe
ASTM    A 815/A 815M-13A : Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM    E 815-11 : Standard Test Method for  Determination of Calcium Fluoride in Fluorspar by Complexometric Titrimetry
ASTM    B 815-02(2011) : Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
ASTM    E 816-05(2010) : Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
ASTM    D 816-06(2011) : Standard Test Methods for  Rubber Cements
ASTM    B 816-00(2009) : Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited
ASTM    C 816-85(2010)e1 : Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method
ASTM    A 817-12 : Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
ASTM    D 817-12 : Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate
ASTM    B 818-03(2013) : Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip
ASTM    F 818-93(2009) : Standard Terminology Relating to Spill Response Barriers
ASTM    A 818-06(2010) : Standard Specification for Coppered Carbon Steel Wire
ASTM    B 819-00(2011) : Standard Specification for Seamless Copper Tube for Medical Gas Systems
ASTM    F 819-10 : Standard Terminology  Relating to Electrical Protective Equipment for Workers
ASTM    B 820-14 : Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
ASTM    A 820/A 820M-11 : Standard Specification for  Steel Fibers for Fiber-Reinforced Concrete
ASTM    F 820-11 : Standard Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems
ASTM    D 820-93(2009) : Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
ASTM    B 821-10 : Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
ASTM    C 821-09 : Standard Specification for Lime for Use with Pozzolans
ASTM    F 821/F 821M-01(2012) : Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine
ASTM    A 821/A 821M-10 : Standard Specification for  Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
ASTM    E 821-96(2009) : Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
ASTM    A 822/A 822M-04(2010) : Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
ASTM    C 822-13 : Standard Terminology Relating to Concrete Pipe and Related Products
ASTM    D 822/D 822M-13 : Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM    F 822-93(2010) : Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine
ASTM    B 822-10 : Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM    E 822-92(2009) : Standard Practice for Determining Resistance of Solar Collector Covers to Hail by Impact With Propelled Ice Balls
ASTM    B 823-09 : Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural  Parts
ASTM    C 823/C 823M-12 : Standard Practice for  Examination and Sampling of Hardened<brk> Concrete in Constructions
ASTM    F 823-93(2010) : Standard Specification for Desk, Log, Marine, Steel, with Cabinet
ASTM    A 823-99(2012) : Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
ASTM    D 823-95(2012)E1 : Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
ASTM    C 824-91(2010) : Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
ASTM    E 824-10 : Standard Test Method for Transfer of Calibration From Reference to Field Radiometers
ASTM    A 824-01(2012) : Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
ASTM    F 824-93(2010) : Standard Specification for Tables, Mess, Marine, Steel
ASTM    B 824-14 : Standard Specification for General Requirements for Copper Alloy Castings
ASTM    F 825-93(2010) : Standard Specification for Drawers, Furniture, Marine, Steel
ASTM    C 825-06(2011) : Standard Specification for Precast Concrete Barriers
ASTM    B 825-13 : Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
ASTM    E 825-98(2009) : Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM    F 826-94(2010) : Standard Specification for Tops, Furniture, Marine, Steel
ASTM    E 826-14 : Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry
ASTM    B 826-09 : Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
ASTM    A 827/A 827M-14 : Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
ASTM    E 827-08 : Standard Practice for Identifying Elements by the Peaks in Auger Electron Spectroscopy
ASTM    C 827/C 827M-10 : Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
ASTM    B 827-05(2009)e2 : Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
ASTM    C 828-11 : Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
ASTM    B 828-02(2010) : Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
ASTM    C 829-81(2010) : Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
ASTM    A 829/A 829M-14 : Standard Specification for Alloy Structural Steel Plates

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST