List of ASTM Standard 2301 to 2400

ASTM    C 681-14 : Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
ASTM    A 681-08 : Standard Specification for  Tool Steels Alloy
ASTM    B 682-01(2009) : Standard Specification for Standard Metric Sizes of Electrical Conductors
ASTM    E 682-92(2011) : Standard Practice for  Liquid Chromatography Terms and Relationships
ASTM    F 682-82a(2008) : Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
ASTM    A 683-05(2010) : Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
ASTM    E 683-91(2013) : Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings
ASTM    F 683-10 : Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
ASTM    B 683-01(2012) : Standard Specification for Pure Palladium Electrical Contact Material
ASTM    A 684/A 684M-12 : Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
ASTM    B 684-97(2012) : Standard Specification for Platinum-Iridium Electrical Contact Materials
ASTM    E 685-93(2005) : Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
ASTM    D 685-12 : Standard Practice for Conditioning Paper and Paper Products for Testing
ASTM    F 685-96(2011) : Standard Practice for Determining Toner Usage, Efficiency, and Dusting Nonheat Fixing Copiers Using Single-Component Toner Systems
ASTM    B 685-01(2012) : Standard Specification for  Palladium-Copper Electrical Contact Material
ASTM    C 685/C 685M-11 : Standard Specification for  Concrete Made by Volumetric Batching and Continuous Mixing
ASTM    F 686-94(2011) : Standard Practice for  Evaluation of Image Quality Produced by Carbonless Copy Paper with an Electric or Electronic Typewriter
ASTM    A 686-92(2010) : Standard Specification for Tool Steel, Carbon
ASTM    B 686/B 686M-11 : Standard Specification for  Aluminum Alloy Castings, High-Strength
ASTM    C 686-90(2011)e1 : Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
ASTM    B 687-99(2011) : Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
ASTM    C 687-12 : Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
ASTM    E 688-94(2011) : Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing
ASTM    A 688/A 688M-12 : Standard Specification for  Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
ASTM    C 688-14 : Standard Specification for Functional Additions for Use in Hydraulic Cements
ASTM    F 688-10 : Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)
ASTM    B 688-96(2009) : Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
ASTM    C 689-09 : Standard Test Method for Modulus of Rupture of Unfired Clays
ASTM    A 689-97(2013)E1 : Standard Specification for Carbon and Alloy Steel Bars for Springs
ASTM    B 689-97(2013) : Standard Specification for Electroplated Engineering Nickel Coatings
ASTM    E 689-10 : Standard Reference Radiographs for Ductile Iron Castings
ASTM    F 689-97(2011) : Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
ASTM    A 690/A 690M-13A : Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
ASTM    B 690-02(2013) : Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
ASTM    E 690-10 : Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes
ASTM    C 690-09 : Standard Test Method for Particle Size Distribution of Alumina or Quartz by Electric Sensing Zone Technique
ASTM    B 691-02(2013) : Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
ASTM    E 691-14 : Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM    A 691/A 691M-09(2014) : Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
ASTM    D 692/D 692M-09 : Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
ASTM    C 692-13 : Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
ASTM    E 692-08 : Standard Test Method for Determining the Content of Cesium-137 in Irradiated Nuclear Fuels by High-Resolution Gamma-Ray Spectral Analysis
ASTM    B 692-90(2012) : Standard Specification for  75 % Silver-25 % % Graphite Sliding Contact Material
ASTM    B 693-91(2012) : Standard Specification for  Silver-Nickel Electrical Contact Materials
ASTM    A 693-13 : Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
ASTM    F 693-01(2012) : Standard Practice for  Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
ASTM    C 693-93(2013) : Standard Test Method for Density of Glass by Buoyancy
ASTM    E 693-12 : Standard Practice for  Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA), E 706(ID)
ASTM    B 694-13 : Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
ASTM    E 694-99(2010) : Standard Specification for Laboratory Glass Volumetric Apparatus
ASTM    C 694-90a(2011)e1 : Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
ASTM    A 694/A 694M-13 : Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
ASTM    B 695-04(2009) : Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
ASTM    F 695-01(2009) : Standard Practice for Ranking of Test Data Obtained for Measurement of Slip Resistance of Footwear Sole, Heel, and Related Materials
ASTM    E 695-03(2009) : Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
ASTM    D 695-10 : Standard Test Method for  Compressive Properties of Rigid Plastics
ASTM    C 695-91(2010) : Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM    C 696-11 : Standard Test Methods for  Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
ASTM    A 696-90a(2012) : Standard Specification for  Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
ASTM    F 696-06(2011) : Standard Specification for Leather Protectors for Rubber Insulating Gloves and Mittens
ASTM    B 696-00(2009) : Standard Specification for Coatings of Cadmium Mechanically Deposited
ASTM    E 696-07(2013) : Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
ASTM    D 696-08 : Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30&#176C and 30&#176C With a Vitreous Silica Dilatometer
ASTM    B 697-88(2010) : Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
ASTM    F 697-00(2006) : Standard Practice for Care and Use of Athletic Mouth Protectors
ASTM    A 697/A 697M-13 : Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
ASTM    E 697-96(2011) : Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography
ASTM    C 697-10 : Standard Test Methods for  Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
ASTM    A 698/A 698M-07 : Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
ASTM    D 698-12E1 : Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
ASTM    E 698-11 : Standard Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
ASTM    C 698-10 : Standard Test Methods for  Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O<sub>2</sub>)
ASTM    B 698-10 : Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
ASTM    B 699-86(2008) : Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
ASTM    E 699-09 : Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components
ASTM    C 700-13 : Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
ASTM    F 700-93(2008) : Standard Practice for  Care and Handling of Intracranial Aneurysm Clips and Instruments
ASTM    B 700-08(2014) : Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
ASTM    A 701/A 701M-10 : Standard Specification for Ferromanganese-Silicon
ASTM    B 701/B 701M-13 : Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
ASTM    F 701-81(2008) : Standard Practice for  Care and Handling of Neurosurgical Implants and Instruments
ASTM    E 701-80(2010) : Standard Test Methods for Municipal Ferrous Scrap
ASTM    E 702-85(2010) : Standard Specification for Municipal Ferrous Scrap
ASTM    C 702/C 702M-11 : Standard Practice for Reducing Samples of Aggregate to Testing Size
ASTM    A 702-13 : Standard Specification for Steel Fence Posts, Hot Wrought
ASTM    B 702-93(2010) : Standard Specification for Copper-Tungsten Electrical Contact Material
ASTM    F 702-10 : Standard Specification for Polysulfone Resin for Medical Applications
ASTM    B 703-10 : Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
ASTM    E 703-14 : Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals
ASTM    A 703/A 703M-13A : Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
ASTM    C 703-72(2011)e1 : Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
ASTM    F 703-07 : Standard Specification for Implantable Breast Prostheses
ASTM    C 704/C 704M-12 : Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM    D 704-99(2012) : Standard Specification for Melamine-Formaldehyde Molding Compounds
ASTM    A 704/A 704M-06(2011) : Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
ASTM    E 704-13 : Standard Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238
ASTM    F 704-81(2009) : Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints
ASTM    B 704-03(2009) : Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
ASTM    E 705-13A : Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237
ASTM    B 705-05(2009) : Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST