List of ASTM Standard 12501 to 12601

ASTM    D 7818-12 : Standard Test Method for Enumeration of Proteolytic Bacteria in Fresh (Uncured) Hides and Skins
ASTM    D 7819-12 : Standard Test Method for Enumeration of Yeast and Mold on Fresh (Uncured) Hides and Skins
ASTM    D 7820-12 : Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel
ASTM    D 7821-12 : Standard Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)
ASTM    D 7822-13 : Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids
ASTM    D 7823-13 : Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption – Gas Chromatography/Mass Chromatography
ASTM    D 7825-12 : Standard Guide for Generating a Process Stream Property Value through the Application of a Process Stream Analyzer
ASTM    D 7826-13 : Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
ASTM    D 7827-12 : Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device
ASTM    D 7828-12 : Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC)
ASTM    D 7829-13E1 : Standard Guide for Sediment and Water Determination in Crude Oil
ASTM    D 7830/D 7830M-13 : Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM    D 7831-13 : Standard Practice for Sampling of Tanks by Field Personnel
ASTM    D 7833-14 : Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
ASTM    D 7834-13 : Standard Test Method for Filling Material Shedding of Paint Brushes
ASTM    D 7835/D 7835M-13 : Standard Test Method for Determining the Solvent Resistance of an Organic Coating using a Mechanical Rubbing Machine
ASTM    D 7836-13 : Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials
ASTM    D 7840-12 : Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware
ASTM    D 7841-13 : Standard Practice for Sustainable Laundry Best Management Practices
ASTM    D 7842/D 7842M-12 : Standard Test Method for Holding Strength of Tack and Prong Fastener Attached Buttons
ASTM    D 7843-12 : Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
ASTM    D 7844-12 : Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM    D 7845-13 : Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography – Mass Spectrometry
ASTM    D 7846-12 : Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites
ASTM    D 7847-12 : Standard Guide for Interlaboratory Studies for Microbiological Test Methods
ASTM    D 7849-14 : Standard Classification for Nomenclature of Reference Materials of Committee D24
ASTM    D 7850-13 : Standard Specification for Biological Properties of Industry Reference Materials (IRM)
ASTM    D 7852-13 : Standard Practice for Use of an Electrically Conductive Geotextile for Leak Location Surveys
ASTM    D 7853-13 : Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete
ASTM    D 7854-13 : Standard Test Method for Carbon Black-Void Volume at Mean Pressure
ASTM    D 7855/D 7855M-13 : Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation
ASTM    D 7856-14 : Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space
ASTM    D 7858-13 : Standard Test Method for Determination of Bisphenol A in Soil, Sludge and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
ASTM    D 7859-13E1 : Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers
ASTM    D 7862-13 : Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel
ASTM    D 7863-13 : Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids
ASTM    D 7865-13 : Standard Guide for Identification, Packaging, Handling, Storage and Deployment of Fabricated Geomembrane Panels
ASTM    D 7866-14 : Standard Specification for Radiation Attenuating Protective Gloves
ASTM    D 7867-13 : Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature
ASTM    D 7868-13 : Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings
ASTM    D 7869-13 : Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
ASTM    D 7870/D 7870M-13 : Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure
ASTM    D 7871-13 : Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)
ASTM    D 7872-13 : Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
ASTM    D 7873-13E1 : Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)
ASTM    D 7874-13 : Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing
ASTM    D 7876-13 : Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants
ASTM    D 7878/D 7878M-13E1 : Standard Tables for Body Measurements for Adult Female Misses Petite Figure Type, Size Range 00P – 20P
ASTM    D 7879-13 : Standard Test Method for Determining Flax Fiber Widths Using Image Analysis
ASTM    D 7880/D 7880M-13 : Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag
ASTM    D 7881-13 : Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode
ASTM    D 7882-13 : Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode
ASTM    D 7883-13 : Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography
ASTM    D 7884-13 : Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography
ASTM    D 7887-13 : Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests
ASTM    D 7888-13 : Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings
ASTM    D 7889-13 : Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
ASTM    D 7893-13 : Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products
ASTM    D 7896-14 : Standard Test Method for Thermal Conductivity, Thermal Diffusivity and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
ASTM    D 7898-14 : Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery
ASTM    D 7899-13 : Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method
ASTM    D 7900-13 : Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
ASTM    D 7901-14a : Standard Specification for Dimethyl Ether for Fuel Purposes
ASTM    D 7903-14 : Standard Practice for Determining the Capacity of Oxygen Removal Ion Exchange Cartridges
ASTM    D 7906-14 : Standard Practice for Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator
ASTM    D 7907-14 : Standard Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves
ASTM    D 7909-14 : Standard Guide for Placement of Blind Actual Leaks during Electrical Leak Location Surveys of Geomembranes
ASTM    D 7910-14 : Standard Practice for Collection of Fungal Material From Surfaces by Tape Lift
ASTM    D 7912-14 : Standard Test Method for Resistance of Finish to Heat Aging (Finish Stability)
ASTM    D 7915-14 : Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set
ASTM    D 7919-14 : Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes
ASTM    D 7940-14 : Standard Practice for Analysis of Liquefied Natural Gas (LNG) by Fiber-Coupled Raman Spectroscopy
ASTM    D 7941/D 7941M-14 : Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
ASTM    D 7953-14 : Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method
ASTM    ISO/ASTM 51204-04 : Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing
ASTM    ISO/ASTM 51205-09 : Standard Practice for Use of a Ceric-Cerous Sulfate Dosimetry System
ASTM    ISO/ASTM 51261-02 : Standard Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing
ASTM    ISO/ASTM 51275-04 : Standard Practice for Use of a Radiochromic Film Dosimetry System
ASTM    ISO/ASTM 51276-02 : Standard Practice for Use of a Polymethylmethacrylate Dosimetry System
ASTM    ISO/ASTM 51310-04(2012) : Standard Practice for Use of a Radiochromic Optical Waveguide Dosimetry System
ASTM    ISO/ASTM 51400-03 : Standard Practice for Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory
ASTM    ISO/ASTM 51401-13 : Standard Practice for Use of a Dichromate Dosimetry System
ASTM    ISO/ASTM 51431-05 : Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food Processing
ASTM    ISO/ASTM 51538-09 : Standard Practice for Use of the Ethanol-Chlorobenzene Dosimetry System
ASTM    ISO/ASTM 51539-05 : Standard Guide for Use of Radiation-Sensitive Indicators
ASTM    ISO/ASTM 51540-04(2012) : Standard Practice for Use of a Radiochromic Liquid Dosimetry System
ASTM    ISO/ASTM 51607-04 : Standard Practice for Use of the Alanine-EPR Dosimetry System
ASTM    ISO/ASTM 51608-05 : Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing
ASTM    ISO/ASTM 51631-03 : Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimeter Calibration
ASTM    ISO/ASTM 51649-05 : Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 MeV
ASTM    ISO/ASTM 51650-05 : Standard Practice for Use of Cellulose Acetate Dosimetry Systems
ASTM    ISO/ASTM 51702-04 : Standard Practice for Dosimetry in a Gamma Irradiation Facility for Radiation Processing
ASTM    ISO/ASTM 51707-05 : Standard Guide for Estimating Uncertainties in Dosimetry for Radiation Processing
ASTM    ISO/ASTM 51818-09  : Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 80 and 300 keV
ASTM    ISO/ASTM 51900-09 : Standard Guide for Dosimetry in Radiation Research on Food and Agricultural Products
ASTM    ISO/ASTM 51939-05 : Standard Practice for Blood Irradiation Dosimetry
ASTM    ISO/ASTM 51940-04 : Standard Guide for Irradiation of Insects for Sterile Release Programs
ASTM    ISO/ASTM 51956-13 : Standard Practice for Use of a Thermoluminescence-Dosimetry System (TLD System) for Radiation Processing
ASTM    ISO/ASTM 52116-02 : Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma-Ray Irradiator
ASTM    ISO/ASTM 52628-13 : Standard Practice for Dosimetry in Radiation Processing
ASTM    ISO/ASTM 52701-13 : Standard Guide for Performance Characterization of Dosimeters and Dosimetry Systems for Use in Radiation Processing

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST