List of ASTM Standard 12301 to 12400

ASTM    D 7583-09 : Standard Test Method for John Deere Coolant Cavitation Test
ASTM    D 7584-10 : Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue to the Growth of Fungi in an Environmental Chamber
ASTM    D 7585/D 7585M-10 : Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable  Hand-Operated Instruments
ASTM    D 7586/D 7586M-11 : Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies
ASTM    D 7588-11 : Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer’s Container
ASTM    D 7589-14 : Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine
ASTM    D 7590-09e1 : Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry
ASTM    D 7591-12 : Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
ASTM    D 7592-10 : Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel
ASTM    D 7593-13 : Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
ASTM    D 7594-11 : Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under  High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM    D 7596-14 : Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM    D 7597-09E2 : Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water
ASTM    D 7598-09E2 : Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
ASTM    D 7599-09e1 : Standard Test Method for Determination of Diethanolamine, Triethanolamine, <span class=”italic”>N</span>-Methyldiethanolamine and <span class=”italic”>N</span>-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/
ASTM    D 7600-09E3 : Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry
ASTM    D 7601-10 : Standard Practice for Pressure Driven Membrane Separation Element/Bundle Evaluation
ASTM    D 7602-11 : Standard Practice for Installation of Vulcanized Rubber Linings
ASTM    D 7603-13 : Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils
ASTM    D 7605-11 : Standard Test Method for Thermoplastic Elastomers<char: emdash>Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM    D 7606-11 : Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases
ASTM    D 7607/D 7607M-11E1 : Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
ASTM    D 7608-10 : Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces
ASTM    D 7611/D 7611M-13 : Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
ASTM    D 7612-10 : Standard Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources
ASTM    D 7613-10 : Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes
ASTM    D 7614-12 : Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements
ASTM    D 7615/D 7615M-11 : Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
ASTM    D 7616/D 7616M-11 : Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
ASTM    D 7617/D 7617M-11 : Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
ASTM    D 7618-13 : Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
ASTM    D 7619-12B : Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM    D 7620-10 : Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
ASTM    D 7621-14 : Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
ASTM    D 7622-10e1 : Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM    D 7623-10 : Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
ASTM    D 7624-10 : Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and  Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform  Infrared (FT-IR) Spectrometry
ASTM    D 7625-10 : Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method
ASTM    D 7626-10 : Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
ASTM    D 7633-13 : Standard Test Method for Carbon Black – Carbon Content
ASTM    D 7634-10 : Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
ASTM    D 7635/D 7635M-10 : Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
ASTM    D 7636/D 7636M-11 : Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems
ASTM    D 7637-10 : Standard Test Method for Determination of Glycerin Assay by Titration  (Sodium Meta Periodate)
ASTM    D 7638-10 : Standard Test Method for Determination of Fatty Acids and Esters in Glycerin
ASTM    D 7639-10(2014) : Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
ASTM    D 7640-11 : Standard Specification for Engine Coolant Grade Glycerin
ASTM    D 7641-10 : Standard Guide for Textile Fibers
ASTM    D 7642-12 : Standard Practice for Establishment of Calibration Cottons for Cotton Classification Instruments
ASTM    D 7643-10 : Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
ASTM    D 7644-10e2 : Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM    D 7645-14 : Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM    D 7646-10 : Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer  Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM    D 7647-10 : Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
ASTM    D 7648-12 : Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
ASTM    D 7649-10 : Standard Test Method for Determination of Trace Carbon Dioxide, Argon, Nitrogen, Oxygen and Water in Hydrogen Fuel by Jet Pulse Injection and Gas Chromatography/Mass Spectrometer Analysis
ASTM    D 7650-13 : Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
ASTM    D 7651-10 : Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen  Fuel
ASTM    D 7652-11 : Standard Test Method for Determination of Trace Hydrogen Sulfide, Carbonyl Sulfide, Methyl Mercaptan, Carbon Disulfide and Total Sulfur in Hydrogen Fuel by Gas Chromatography and Sulfur Chemiluminescence Detection
ASTM    D 7653-10 : Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy
ASTM    D 7654/D 7654M-10 : Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer
ASTM    D 7655/D 7655M-12 : Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems
ASTM    D 7659-10 : Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
ASTM    D 7660-10 : Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings
ASTM    D 7661-10 : Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
ASTM    D 7662-13 : Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
ASTM    D 7663-12 : Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
ASTM    D 7664-10 : Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
ASTM    D 7665-10 : Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids
ASTM    D 7666-12 : Standard Specification for Triglyceride Burner Fuel
ASTM    D 7667-10E2 : Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel – Thin Silver Strip Method
ASTM    D 7668-14 : Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils – Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM    D 7669-11 : Standard Guide for Practical Lubricant Condition Data Trend Analysis
ASTM    D 7670-10 : Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
ASTM    D 7671-10e1 : Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel – Silver Strip Method
ASTM    D 7672-13 : Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
ASTM    D 7673/D 7673M-10E2 : Standard Specification for Halon 1211, Bromochlorodifluoromethane (CF2BrCl)
ASTM    D 7674-14a : Standard Test Method for Hexane/Petroleum Ether Extract in Wet Blue and Wet White
ASTM    D 7675-11 : Standard Test Method for Test Method for the Determination of Total Hydrocarbons in Hydrogen by FID Based Total Hydrocarbon (THC) Analyzer
ASTM    D 7677-11 : Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
ASTM    D 7678-11 : Standard Test Method for Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
ASTM    D 7679-13 : Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils
ASTM    D 7680-10 : Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester
ASTM    D 7681-11 : Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM    D 7682-12 : Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty
ASTM    D 7683-11 : Standard Test Method for Cloud Point of Petroleum Products (Small Test Jar Method)
ASTM    D 7684-11 : Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants
ASTM    D 7685-11 : Standard Practice for In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings
ASTM    D 7686-11 : Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
ASTM    D 7687-11 : Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration
ASTM    D 7688-11 : Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation
ASTM    D 7689-11 : Standard Test Method for Cloud Point of Petroleum Products (Mini Method)
ASTM    D 7690-11 : Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
ASTM    D 7691-11 : Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM    “D 7698-11a : Standard Test Method for In-Place Estimation of Density and Water Content of Soil and     Aggregate by Correlation with Complex Impedance Method”
ASTM    D 7699/D 7699M-11 : Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites
ASTM    D 7700-12 : Standard Guide for Selecting Test Methods for Geomembrane Seams
ASTM    D 7701-11 : Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag
ASTM    D 7702/D 7702M-14 : Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics
ASTM    D 7703-11 : Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance System

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST