List of ASTM Standard 11801 to 11900

ASTM    D 7007-09 : Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earth Materials
ASTM    D 7008-08(2013) : Standard Specification for Geosynthetic Alternate Daily Covers
ASTM    D 7011-10a : Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
ASTM    D 7012-14 : Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
ASTM    D 7013/D 7013M-11 : Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges
ASTM    D 7014-10 : Standard Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses
ASTM    D 7015-13 : Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
ASTM    D 7016/D 7016M-09e1 : Standard Test Method to Evaluate Edge Binding Components Used in Mattresses After Exposure to An Open Flame
ASTM    D 7017-14 : Standard Performance Specification for Rainwear and All-Purpose, Water-Repellent Coat Fabrics
ASTM    D 7018/D 7018M-12 : Standard Terminology Relating to Glass Fiber and Its Products
ASTM    D 7019-14 : Standard Performance Specification for Brassiere, Slip, Lingerie and Underwear Fabrics
ASTM    D 7020-14 : Standard Performance Specification for Woven Blouse, Dress, Dress Shirt & Sport Shirt Fabrics
ASTM    D 7021-14 : Standard Performance Specification for Bathrobe, Dressing Gown, Negligee, Nightgown, and Pajama Fabrics
ASTM    D 7022-13 : Standard Terminology Relating to Apparel
ASTM    D 7023-06(2012) : Standard Terminology Relating to Home Furnishings
ASTM    D 7025-09 : Standard Test Method for Assessing Clean Flax Fiber Fineness
ASTM    D 7026-13 : Standard Guide for Sampling and Reporting of Results for Determination of Percent Biobased Content of Materials via Carbon Isotope Analysis
ASTM    D 7028-07e1 : Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM    D 7029-09 : Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0F [82.2°C] ASTM    D 7030-04(2009) : Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
ASTM    D 7031-11 : Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products
ASTM    D 7032-10a : Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)
ASTM    D 7033-07 : Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels
ASTM    D 7034-11 : Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations
ASTM    D 7035-10 : Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM    D 7036-12 : Standard Practice for Competence of Air Emission Testing Bodies
ASTM    D 7038-13 : Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
ASTM    D 7039-13 : Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM    D 7040-04(2010) : Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM    D 7041-04(2010)E1 : Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection
ASTM    D 7042-14 : Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM    D 7043-12 : Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
ASTM    D 7044-04a(2010) : Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids
ASTM    D 7045-04(2010) : Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities
ASTM    D 7046-11 : Standard Guide for Use of the Metal Detection Method for Subsurface Exploration
ASTM    D 7047-12 : Standard Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium)
ASTM    D 7048-04(2010) : Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
ASTM    D 7049-04(2010) : Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres
ASTM    D 7050-04(2009) : Standard Practice for Rubber from Natural Sources-Sampling and Sorting Bales Based on Predicted Processing Properties
ASTM    D 7051-05(2013) : Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface
ASTM    D 7053/D 7053M-11 : Standard Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs
ASTM    D 7054-04(2013) : Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America
ASTM    D 7055-09 : Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
ASTM    D 7056-07(2012) : Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams
ASTM    D 7057-13 : Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
ASTM    D 7058-04(2009) : Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
ASTM    D 7059-09(2013) : Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
ASTM    D 7060-12 : Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
ASTM    D 7061-12 : Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
ASTM    D 7063/D 7063M-11 : Standard Test Method for Effective Porosity and  Effective Air Voids of Compacted  Bituminous  Paving Mixture Samples
ASTM    D 7064/D 7064M-08(2013) : Standard Practice for Open-Graded Friction Course (OGFC) Mix Design
ASTM    D 7065-06 : Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry
ASTM    D 7066-04(2011) : Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
ASTM    D 7069-04(2010) : Standard Guide for Field Quality Assurance in a Groundwater Sampling Event
ASTM    D 7070-08 : Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
ASTM    D 7072-04(2013) : Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings
ASTM    D 7073-05(2012) : Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films
ASTM    D 7076-10 : Standard Test Method for Measurement of Shives in Retted Flax
ASTM    D 7078/D 7078M-12 : Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM    D 7082-04(2010) : Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe
ASTM    D 7083-04(2010)e1 : Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography
ASTM    D 7084-04(2009) : Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM    D 7085-04(2010)e1 : Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM    D 7087-05a(2010) : Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments
ASTM    D 7088-08 : Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade    Applications Applied to Masonry
ASTM    D 7089-06 : Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing
ASTM    D 7090-04(2010) : Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography
ASTM    D 7091-13 : Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM    D 7093-13 : Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
ASTM    D 7094-12E1 : Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM    D 7095-04(2009) : Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM    D 7096-10 : Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
ASTM    D 7097-09 : Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT
ASTM    D 7098-08e1 : Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM    D 7099-04(2010) : Standard Terminology Relating to Frozen Soil and Rock
ASTM    D 7100-11 : Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
ASTM    D 7101-13 : Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions
ASTM    D 7102-10 : Standard Guide for Determination of Endotoxin on Sterile Medical Gloves
ASTM    D 7103-06(2013) : Standard Guide for Assessment of Medical Gloves
ASTM    D 7105-06(2013) : Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems
ASTM    D 7106-05(2010) : Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
ASTM    D 7107-04(2010) : Standard Test Method for Creep Measurement of Self-Lubricating Bushings
ASTM    D 7108-12 : Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist
ASTM    D 7109-12 : Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles
ASTM    D 7110-05a(2011) : Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
ASTM    D 7111-14 : Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM    D 7112-12 : Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM    D 7113/D 7113M-10 : Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
ASTM    D 7115-10 : Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
ASTM    D 7215-08(2013) : Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
ASTM    D 7119/D 7119M-13A : Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing
ASTM    D 7120/D 7120M-10 : Standard Guide for Evaluation and Preparation of Roof Membranes for Coating Application
ASTM    D 7121-05(2012) : Standard Test Method for Rubber Property – Resilience Using Schob Type Rebound Pendulum
ASTM    D 7122-11 : Standard Specification for HCFC Blend B (CF<sub>3</sub>CCl<sub>2</sub>H, Ar, and CF<sub>4</sub>)
ASTM    D 7123-11 : Standard Practice for Handling, Transportation, and Storage of HCFC Blend B (CF<sub>3</sub>CCl<sub>2</sub>H, Ar, and CF<sub>4</sub>)
ASTM    D 7124-12 : Standard Specification for Benzene for Use with Zeolite Based Catalysts
ASTM    D 7125-11 : Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process
ASTM    D 7126-10 : Standard Test Method for On-Line Colorimetric Measurement of Silica
ASTM    D 7127-13 : Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
ASTM    D 7128-05(2010) : Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST