List of ASTM Standard 11701 to 11800

ASTM    D 6890-13BE1 : Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM    D 6891-14 : Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
ASTM    D 6892-03(2014) : Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
ASTM    D 6894-13 : Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
ASTM    D 6895-06(2012) : Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100°C
ASTM    D 6896-12 : Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM    D 6897-09 : Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
ASTM    D 6898-03(2010) : Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig
ASTM    D 6900-10 : Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
ASTM    D 6901-06 : Standard Specification for Artists’ Colored Pencils
ASTM    D 6902-04(2011) : Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
ASTM    D 6903-07(2013) : Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water
ASTM    D 6904-03(2013) : Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
ASTM    D 6905-03(2012) : Standard Test Method for Impact Flexibility of Organic Coatings
ASTM    D 6906-12A : Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM    D 6907-05(2010) : Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers
ASTM    D 6908-06(2010) : Standard Practice for Integrity Testing of Water Filtration Membrane Systems
ASTM    D 6909-10 : Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer
ASTM    D 6910/D 6910M-09 : Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries
ASTM    D 6911-03(2010) : Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
ASTM    D 6913-04(2009) : Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM    D 6914-04(2010) : Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
ASTM    D 6915-12 : Standard Practice for Carbon Black – Evaluation of Standard Reference Blacks
ASTM    D 6916-06c(2011) : Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
ASTM    D 6917-03(2011) : Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
ASTM    D 6918-09(2014)E1 : Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
ASTM    D 6919-09 : Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
ASTM    D 6920-13 : Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection
ASTM    D 6922-13 : Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
ASTM    D 6923-14 : Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine – Caterpillar 1R Test Procedure
ASTM    D 6924-03(2012) : Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
ASTM    D 6925-09 : Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM    D 6926-10 : Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
ASTM    D 6927-06 : Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures
ASTM    D 6928-10 : Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM    D 6929-10 : Standard Practice for Freezing of Emulsified Asphalts
ASTM    D 6930-10 : Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts
ASTM    D 6931-12 : Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
ASTM    D 6932/D 6932M-08(2013) : Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
ASTM    D 6933-13 : Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
ASTM    D 6934-08 : Standard Test Method for Residue by Evaporation of Emulsified Asphalt
ASTM    D 6935-11 : Standard Test Method for Determining  Cement Mixing of Emulsified Asphalt
ASTM    D 6936-09 : Standard Test Method for Determining Demulsibility of Emulsified Asphalt
ASTM    D 6937-08 : Standard Test Method for Determining  Density of Emulsified Asphalt
ASTM    D 6938-10 : Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM    D 6940-10 : Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids
ASTM    D 6941-12 : Standard Practice for Measuring Fluidization Segregation Tendencies of Powders
ASTM    D 6942-03(2012) : Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments
ASTM    D 6943-10 : Standard Practice for Immersion Testing of Industrial Protective Coatings
ASTM    D 6944-09E1 : Standard Practice for Resistance of Cured Coatings to Thermal Cycling
ASTM    D 6945/D 6945M-03(2011)e1 : Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)
ASTM    D 6946/D 6946M-13E1 : Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)
ASTM    D 6947/D 6947M-07(2013)E1 : Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
ASTM    D 6948/D 6948M-03(2011)e1 : Standard Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade)
ASTM    D 6950/D 6950M-04(2012)E1 : Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks
ASTM    D 6951/D 6951M-09 : Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM    D 6953-11 : Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)
ASTM    D 6954-04(2013) : Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
ASTM    D 6956-11 : Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
ASTM    D 6957-12 : Standard Practice for Measuring Curl in Paint Brush Filling Material
ASTM    D 6958-03(2009) : Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings
ASTM    D 6959-08 : Standard Practice for Data Exchange Format for Sewn Product Plotting Devices
ASTM    D 6960-04 : Standard Table of Body Measurements Relating to Women’s Plus Size Figure Type, Sizes 14W-32W
ASTM    D 6961/D 6961M-09 : Standard Test Method for Color Measurement of Flax Fiber
ASTM    D 6962-12 : Standard Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings
ASTM    D 6963-13 : Standard Terminology Relating to Sewn Products Automation
ASTM    D 6966-13 : Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM    D 6968-03(2009) : Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection
ASTM    D 6969-03(2008) : Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
ASTM    D 6970-03(2013)E1 : Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
ASTM    D 6971-09 : Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
ASTM    D 6973-08e1 : Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
ASTM    D 6974-09(2013) : Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels – Filtration and Culture Procedures
ASTM    D 6975-04(2010) : Standard Test Method for Cummins M11 EGR Test
ASTM    D 6976-13 : Standard Specification for Rubber Contraceptives – Vaginal Diaphragms
ASTM    D 6977-04(2010) : Standard Specification for Polychloroprene Examination Gloves for Medical Application
ASTM    D 6978-05(2013) : Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs
ASTM    D 6979-13 : Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen
ASTM    D 6980-12 : Standard Test Method for Determination of Moisture in Plastics by Loss in Weight
ASTM    D 6982-09 : Standard Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns
ASTM    D 6984-14 : Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
ASTM    D 6986-03(2010) : Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
ASTM    D 6987/D 6987M-13A : Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine
ASTM    D 6988-13 : Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM    D 6989-03(2013) : Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions
ASTM    D 6990-05(2011) : Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems
ASTM    D 6991-05(2010) : Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
ASTM    D 6992-03(2009) : Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM    D 6994-10 : Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
ASTM    D 6995-05(2013) : Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)
ASTM    D 6997-12 : Standard Test Method for Distillation of Emulsified Asphalt
ASTM    D 6998-11 : Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts
ASTM    D 6999-12 : Standard Practice for Miscibility of Emulsified Asphalts
ASTM    D 7000-11 : Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
ASTM    D 7001-06(2011) : Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
ASTM    D 7002-10 : Standard Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System
ASTM    D 7003/D 7003M-03(2013)E1 : Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes
ASTM    D 7004/D 7004M-03(2013)E1 : Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes
ASTM    D 7005-03(2008) : Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
ASTM    D 7006-03(2013) : Standard Practice for Ultrasonic Testing of Geomembranes


Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *


    Testing Needed *





    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    Telephone : (0253) 2361782
    Mobile : +91 9552508782



    [sp_faq category="19"]


    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services


    Need help or have a question? (0253) 2361782