List of ASTM Standard 11101 to 11200

ASTM    D 6222/D 6222M-11 : Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM    D 6223/D 6223M-02(2009)e1 : Standard Specification for  Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
ASTM    D 6224-09 : Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
ASTM    D 6225/D 6225M-98 (Reapproved 2012)e1 : Standard Test Method for Granule Cover of Mineral Surfaced Roofing
ASTM    D 6226-10 : Standard Test Method for Open Cell Content of Rigid Cellular Plastics
ASTM    D 6227-12 : Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
ASTM    D 6228-10 : Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
ASTM    D 6229-06(2010) : Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography
ASTM    D 6230-13 : Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM    D 6231-11 : Standard Specification for HFC-125 (Pentafluoroethane, C<sub>2</sub>HF<sub>5</sub>)
ASTM    D 6232-08 : Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities
ASTM    D 6233-98(2009) : Standard Guide for Data Assessment for Environmental Waste Management Activities
ASTM    D 6234-13 : Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
ASTM    D 6235-04(2010) : Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites
ASTM    D 6236-11 : Standard Guide for Coring and Logging Cement – or Lime-Stabilized Soil
ASTM    D 6237-09 : Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
ASTM    D 6238-98(2011) : Standard Test Method for Total Oxygen Demand in Water
ASTM    D 6239-09 : Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry
ASTM    D 6240/D 6240M-12e1 : Standard Tables of Body Measurements for Mature Men, ages 35 and older, Sizes Thirty-Four to Fifty-Two (34 to 52) Short, Regular, and Tall
ASTM    D 6241-14 : Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM    D 6243/D 6243M-13A : Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method
ASTM    D 6244-06(2011) : Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
ASTM    D 6245-12 : Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
ASTM    D 6246-08(2013) : Standard Practice for Evaluating the Performance of Diffusive Samplers
ASTM    D 6247-10 : Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM    D 6248-98(2012)e1 : Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM    D 6249-06(2011) : Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals
ASTM    D 6250-98(2009) : Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions
ASTM    D 6251/D 6251M-11 : Standard Specification for Wood-Cleated Panelboard Shipping Boxes
ASTM    D 6252/D 6252M-98(2011) : Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90&#176 Angle
ASTM    D 6253-10 : Standard Practice for Treatment and/or Marking of Wood Packaging Materials
ASTM    D 6254/D 6254M-13 : Standard Specification for Wirebound Pallet-Type Wood Boxes
ASTM    D 6255/D 6255M-05(2011) : Standard Specification for Steel or Aluminum Slotted Angle Crates
ASTM    D 6256/D 6256M-10 : Standard Specification for Wood-Cleated Shipping Boxes and Skidded, Load-Bearing Bases
ASTM    D 6258-09 : Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM    D 6259-98(2010) : Standard Practice for Determination of a Pooled Limit of Quantitation
ASTM    D 6261-14 : Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
ASTM    D 6262-12 : Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)
ASTM    D 6263-11 : Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
ASTM    D 6264/D 6264M-12 : Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM    D 6265-09 : Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test
ASTM    D 6266-00a(2011) : Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM    D 6267/D 6267M-13 : Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
ASTM    D 6268-09 : Standard Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (C<sub>2</sub>HF<sub>5</sub>)
ASTM    D 6270-08(2012) : Standard Practice for Use of Scrap Tires in Civil Engineering Applications
ASTM    D 6271-10 : Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol
ASTM    D 6272-10 : Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM    D 6273-14 : Standard Test Methods for Natural Gas Odor Intensity
ASTM    D 6274-10 : Standard Guide for Conducting Borehole Geophysical Logging – Gamma
ASTM    D 6276-99a(2006)e1 : Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
ASTM    D 6277-07(2012) : Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM    D 6278-12E1 : Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus
ASTM    D 6279-03(2013) : Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
ASTM    D 6280-98(2008) : Standard Specification for Zinc Phosphate Pigments
ASTM    D 6281-09 : Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
ASTM    D 6282/D 6282M-14 : Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
ASTM    D 6283-12 : Standard Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings
ASTM    D 6284-09 : Standard Test Method for Rubber Property&#8212;Effect of Aqueous Solutions with Available Chlorine and Chloramine
ASTM    D 6285-99(2012)E1 : Standard Guide for Locating Abandoned Wells
ASTM    D 6286-12 : Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
ASTM    D 6287-09 : Standard Practice for Cutting Film and Sheeting Test Specimens
ASTM    D 6288-09 : Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
ASTM    D 6289-13 : Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
ASTM    D 6290-13 : Standard Test Method for Color Determination of Plastic Pellets
ASTM    D 6294/D 6294M-13 : Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing
ASTM    D 6295/D 6295M-98(2011) : Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape
ASTM    D 6296-98(2013) : Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography
ASTM    D 6297-13 : Standard Specification for Asphaltic Plug Joints for Bridges
ASTM    D 6298-13 : Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
ASTM    D 6299-13 : Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM    D 6300-13A : Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM    D 6301-13 : Standard Practice for Collection of On-Line Composite Samples of Suspended Solids and Ionic Solids in Process Water
ASTM    D 6302-98(2009) : Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins
ASTM    D 6304-07 : Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ASTM    D 6305-08 : Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
ASTM    D 6306-10 : Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air
ASTM    D 6307-10 : Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
ASTM    D 6311-98(2009) : Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
ASTM    D 6312-98(2012)E1 : Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs
ASTM    D 6316-09BE1 : Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
ASTM    D 6317-98(2009) : Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM    D 6318-03(2014) : Standard Practice for Calibrating a Fathometer Using a Bar Check Method
ASTM    D 6319-10 : Standard Specification for Nitrile Examination Gloves for Medical Application
ASTM    D 6320/D 6320M-10(2014) : Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel
ASTM    D 6321/D 6321M-14 : Standard Practice for the Evaluation of Machine Washable T-Shirts
ASTM    D 6322-07 : Standard Guide to International Test Methods Associated with Textile Care Procedures
ASTM    D 6323-12E1 : Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities
ASTM    D 6324-11 : Standard Test Methods for Male Condoms Made from Polyurethane
ASTM    D 6325-98(2011) : Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives
ASTM    D 6326-08(2014) : Standard Practice for The Selection of Maximum Transit-Rate Ratios and Depths for the U.S. Series of Isokinetic Suspended-Sediment Samplers
ASTM    D 6327-10 : Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM    D 6328-12 : Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition
ASTM    D 6329-98(2008) : Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
ASTM    D 6330-98(2008) : Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions
ASTM    D 6331-13 : Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM    D 6332-12 : Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
ASTM    D 6333-10 : Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors
ASTM    D 6334-12 : Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
ASTM    D 6335-09 : Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
ASTM    D 6336-11 : Standard Practice for   Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST