List of ASTM Standard 11001 to 11100

ASTM    D 6105-04(2012) : Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
ASTM    D 6106-97(2010) : Standard Guide for Establishing Nomenclature of Groundwater Aquifers
ASTM    D 6107-97(2012) : Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
ASTM    D 6108-13 : Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
ASTM    D 6109-13 : Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
ASTM    D 6110-10 : Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM    D 6111-13A : Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
ASTM    D 6112-13 : Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
ASTM    D 6113-11 : Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM    D 6114/D 6114M-09 : Standard Specification for Asphalt-Rubber Binder
ASTM    D 6115-97(2011) : Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM    D 6116-00(2010) : Standard Test Method for Blocking
ASTM    D 6117-13e1 : Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes
ASTM    D 6119-12 : Standard Practice for  Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic
ASTM    D 6120-97(2012) : Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
ASTM    D 6121-14 : Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM    D 6122-13 : Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM    D 6123/D 6123M-97(2012) : Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
ASTM    D 6124-06(2011) : Standard Test Method for Residual Powder on Medical Gloves
ASTM    D 6126/D 6126M-11E1 : Standard Specification for HFC-23 (Trifluoromethane, CHF3)
ASTM    D 6127-11 : Standard Practice for Handling, Transportation, and Storage of HFC-23 (Trifluoromethane, CHF<sub>3</sub>)
ASTM    D 6128-06 : Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell
ASTM    D 6129-97(2007) : Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
ASTM    D 6130-11 : Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM    D 6131-97(2012) : Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments
ASTM    D 6132-13 : Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM    D 6133-02(2008) : Standard Test Method for Acetone, <i>p</i>-Chlorobenzotrifluoride, Methyl Acetate or <i>t</i>-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
ASTM    D 6134-07(2013) : Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems
ASTM    D 6136/D 6136M-97(2013)E1 : Standard Test Method for Kerosine Number of Unsaturated (Dry) Felt by Vacuum Method
ASTM    D 6137-97(2012) : Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems
ASTM    D 6138-13 : Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
ASTM    D 6139-11 : Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask
ASTM    D 6140-00(2014) : Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
ASTM    D 6141-09 : Standard Guide for Screening Clay Portion of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids
ASTM    D 6142-12 : Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
ASTM    D 6143-13 : Standard Test Method for Iron Content of Bisphenol A (4,4′ – Isopropylidenediphenol)
ASTM    D 6144-13 : Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography
ASTM    D 6145-97(2012) : Standard Guide for Monitoring Sediment in Watersheds
ASTM    D 6146-97(2012) : Standard Guide for Monitoring Aqueous Nutrients in Watersheds
ASTM    D 6147-97(2008)e1 : Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer<span class=’unicode’>&#x2014;</span>Determination of Force Decay (Stress Relaxation) in Compression
ASTM    D 6150-09 : Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility
ASTM    D 6151-08 : Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
ASTM    D 6152/D 6152M-12 : Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing
ASTM    D 6153-97(2007) : Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems
ASTM    D 6154-09 : Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction
ASTM    D 6155-13 : Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures
ASTM    D 6157-97(2011) : Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release
ASTM    D 6158-10 : Standard Specification for Mineral Hydraulic Oils
ASTM    D 6159-97(2012) : Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography
ASTM    D 6160-98(2013) : Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography
ASTM    D 6161-10 : Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration and Reverse Osmosis Membrane Processes
ASTM    D 6162-00a(2008) : Standard Specification for  Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
ASTM    D 6163-00(2008) : Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
ASTM    D 6164/D 6164M-11 : Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM    D 6165-97(2012) : Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials
ASTM    D 6166-12 : Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)
ASTM    D 6167-11 : Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
ASTM    D 6168-97(2010) : Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids
ASTM    D 6169/D 6169M-13 : Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
ASTM    D 6170-97(2010) : Standard Guide for Selecting a Groundwater Modeling Code
ASTM    D 6171-97(2010) : Standard Guide for Documenting a Groundwater Modeling Code
ASTM    D 6172-98(2010) : Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures
ASTM    D 6173-97(2014) : Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration
ASTM    D 6174-01(2006) : Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration
ASTM    D 6175-03(2013) : Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM    D 6176-97(2008) : Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
ASTM    D 6177-97(2008)e1 : Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets
ASTM    D 6178-97(2008) : Standard Practice for Estimation of Short-term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
ASTM    D 6179-07(2014) : Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
ASTM    D 6182-00(2010) : Standard Test Method for Flexibility and Adhesion of Finish on Leather
ASTM    D 6183-00(2010) : Standard Test Method for Tackiness of Finish on Leather
ASTM    D 6185-11 : Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
ASTM    D 6186-08(2013) : Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM    D 6187-97(2010) : Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
ASTM    D 6188-97(2008) : Standard Test Method for  Viscosity of Cellulose by Cuprammonium Ball Fall
ASTM    D 6189-97(2014) : Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings
ASTM    D 6191-97(2008)e1 : Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings
ASTM    D 6192-11 : Standard Tables of Body Measurements for Girls, Sizes 2 to 20 (Reg <span class=’unicode’>&#x0026;</span> Slim) and Girls Plus
ASTM    D 6193-11 : Standard Practice for Stitches and Seams
ASTM    D 6194-10 : Standard Test Method for Glow-Wire Ignition of Materials
ASTM    D 6195-03(2011) : Standard Test Methods for Loop Tack
ASTM    D 6196-03(2009) : Standard Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air
ASTM    D 6197-99(2011) : Standard Test Method for Classifying and Counting Faults in Spun Yarns in Electronic Tests
ASTM    D 6198-12 : Standard Guide for Transport Packaging Design
ASTM    D 6199-07(2012) : Standard Practice for Quality of Wood Members of Containers and Pallets
ASTM    D 6200-01(2012) : Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM    D 6201-04(2009) : Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
ASTM    D 6203-06(2012) : Standard Test Method for Thermal Stability of Way Lubricants
ASTM    D 6204-12 : Standard Test Method for Rubber – Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM    D 6205-12 : Standard Practice for Calibration of the James Static Coefficient of Friction Machine
ASTM    D 6206-09 : Standard Practice for Sampling of Coating Films
ASTM    D 6207-03(2011) : Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM    D 6208-07(2014) : Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
ASTM    D 6209-13 : Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
ASTM    D 6210-10 : Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
ASTM    D 6213-97(2009) : Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids
ASTM    D 6214/D 6214M-98(2013)E1 : Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods
ASTM    D 6216-12 : Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications
ASTM    D 6217-11 : Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM    D 6221/D 6221M-00(2014)E1 : Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing


Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *


    Testing Needed *





    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    Telephone : (0253) 2361782
    Mobile : +91 9552508782



    [sp_faq category="19"]


    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services


    Need help or have a question? (0253) 2361782