List of ASTM Standard 10701 to 10800

ASTM    D 5753-05(2010) : Standard Guide for  Planning and Conducting Borehole Geophysical Logging
ASTM    D 5754-95(2006) : Standard Guide for  Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements<char: emdash>Trilinear Diagrams for Two or More Analyses
ASTM    D 5755-09(2014)e1 : Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
ASTM    D 5756-02(2008) : Standard Test Method for  Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Surface Loading
ASTM    D 5757-11 : Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets
ASTM    D 5758-01(2011)e1 : Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
ASTM    D 5759-12 : Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
ASTM    D 5760-13 : Standard Specification for Performance of Manual Transmission Gear Lubricants
ASTM    D 5761-96(2012) : Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials
ASTM    D 5762-12 : Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM    D 5763-11 : Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware
ASTM    D 5764-97A(2013) : Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products
ASTM    D 5765-05(2010) : Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating
ASTM    D 5766/D 5766M-11 : Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
ASTM    D 5767-95(2012) : Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
ASTM    D 5768-02(2010) : Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
ASTM    D 5769-10 : Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
ASTM    D 5770-11 : Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating  Oils During Oxidation Testing
ASTM    D 5771-12 : Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
ASTM    D 5772-10 : Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM    D 5773-10 : Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM    D 5774-95(2009) : Standard Test Methods for Rubber-Chemical Analysis of Extractables
ASTM    D 5775-95(2009)E1 : Standard Test Method for Rubber – Determination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index
ASTM    D 5776-14 : Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
ASTM    D 5777-00(2011)e1 : Standard Guide for  Using the Seismic Refraction Method for Subsurface Investigation
ASTM    D 5778-12 : Standard Test Method for  Electronic Friction Cone and Piezocone Penetration Testing of Soils
ASTM    D 5779/D 5779M-14 : Standard Test Method for Field Determination of Rapid Specific Gravity of Rock and Manmade Materials for Erosion Control
ASTM    D 5780-10 : Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load
ASTM    D 5781/D 5781M-13 : Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM    D 5782-95(2012) : Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM    D 5783-95(2012) : Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM    D 5784/D 5784M-13 : Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM    D 5785-95(2013) : Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
ASTM    D 5786-95(2012) : Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems
ASTM    D 5787-95(2009) : Standard Practice for Monitoring Well Protection
ASTM    D 5788-95(2011) : Standard Guide for Spiking Organics into Aqueous Samples
ASTM    D 5790-95(2012) : Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
ASTM    D 5791-95(2012)e1 : Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
ASTM    D 5792-10 : Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
ASTM    D 5793-13 : Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings
ASTM    D 5794-95(2008) : Standard Guide for  Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography
ASTM    D 5795-95(2008) : Standard Test Method for  Determination of Liquid Water Absorption of Coated Hardboard and Other  Composite Wood Products Via<br> <span class=’unicode’>&#x201C;</span>Cobb Ring<span class=’unicode’>&#x201D;</span> Apparatus
ASTM    D 5796-10 : Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
ASTM    D 5797-13 : Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines
ASTM    D 5798-14 : Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM    D 5799-95(2009) : Standard Test Method for Determination of Peroxides in Butadiene
ASTM    D 5800-10 : Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM    D 5801-12 : Standard Test Method for Toughness and Tenacity of Bituminous Materials
ASTM    D 5805-00(2009) : Standard Test Method for Rubber from Synthetic Sources–Carbon Black in Masterbatches
ASTM    D 5806-95(2009) : Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration
ASTM    D 5807-08(2013) : Standard Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions
ASTM    D 5808-09A(2014) : Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
ASTM    D 5810-96(2011) : Standard Guide for Spiking into Aqueous Samples
ASTM    D 5811-08(2013) : Standard Test Method for Strontium-90 in Water
ASTM    D 5813-04(2012) : Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM    D 5814-10 : Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
ASTM    D 5817-03a(2008) : Standard Practice for  Carbon Black, Pelleted – Reduction, Blending, and Drying of Gross Samples for Testing
ASTM    D 5818-11 : Standard Practice for  Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics
ASTM    D 5819-05(2012) : Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM    D 5820-95(2011) : Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes
ASTM    D 5821-13 : Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
ASTM    D 5822-13 : Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
ASTM    D 5823-13 : Standard Test Method for Tuft Height of Pile Floor Coverings
ASTM    D 5824-98(2011) : Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM    D 5827-09e1 : Standard Test Method for  Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM    D 5828-97(2011)e1 : Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
ASTM    D 5829-96(2007) : Standard Guide for Preparing a Training Program for Environmental Analytical Laboratories
ASTM    D 5830-14 : Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography
ASTM    D 5831-09 : Standard Test Method for  Screening Fuels in Soils
ASTM    D 5832-98(2008) : Standard Test Method for  Volatile Matter Content of Activated Carbon Samples
ASTM    D 5833-12 : Standard Guide for  Source Reduction Reuse, Recycling, or Disposal of Steel Cans
ASTM    D 5835-95(2013) : Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM    D 5836-08(2013) : Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6- Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)
ASTM    D 5837-12 : Standard Test Method for  Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC)
ASTM    D 5839-96(2006) : Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM    D 5842-14 : Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
ASTM    D 5843-95(2006) : Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing
ASTM    D 5845-01(2011) : Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and  <span class=”italic”>tert</span>-Butanol in Gasoline by Infrared Spectroscopy
ASTM    D 5846-07(2012) : Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
ASTM    D 5847-02(2012) : Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM    D 5848-10e1 : Standard Test Method for  Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM    D 5849/D 5849M-07(2013)E1 : Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement)
ASTM    D 5850-95(2012) : Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
ASTM    D 5851-95(2011) : Standard Guide for Planning and Implementing a Water Monitoring Program
ASTM    D 5852-00(2007) : Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method
ASTM    D 5853-11 : Standard Test Method for Pour Point of Crude Oils
ASTM    D 5854-96(2010) : Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM    D 5855-95(2013) : Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
ASTM    D 5856-95(2007) : Standard Test Method for  Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM    D 5857-14 : Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
ASTM    D 5858-96(2008) : Standard Guide for  Calculating <span class=”italic”>In Situ</span> Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
ASTM    D 5860-95(2013) : Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
ASTM    D 5861-07(2013) : Standard Guide for Significance of Particle Size Measurements of Coating Powders
ASTM    D 5863-00a(2011) : Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM    D 5864-11 : Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components
ASTM    D 5865-13 : Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM    D 5866-05 : Standard Test Method for Neps in Cotton Fibers (AFIS-N Instrument)
ASTM    D 5867-12E1 : Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments
ASTM    D 5868-01(2014) : Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
ASTM    D 5869-07A(2013) : Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST