List of ASTM Standard 10501 to 10600

ASTM    D 5492-10 : Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
ASTM    D 5493-06(2011) : Standard Test Method for Permittivity of Geotextiles Under Load
ASTM    D 5494-93(2011) : Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes
ASTM    D 5495-03(2011) : Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
ASTM    D 5496-98(2009) : Standard Practice for In Field Immersion Testing of Geosynthetics
ASTM    D 5498-12A : Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
ASTM    D 5499-94(2013) : Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems
ASTM    D 5500-98(2008) : Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
ASTM    D 5501-12E1 : Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
ASTM    D 5502-00(2010) : Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
ASTM    D 5503-94(2008) : Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation
ASTM    D 5504-12 : Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM    D 5505-14 : Standard Practice for Classifying Emulsified Recycling Agents
ASTM    D 5506-08 : Standard Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials
ASTM    D 5507-99(2012) : Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography
ASTM    D 5508-94a(2009)e1 : Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
ASTM    D 5511-12 : Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM    D 5513-99(2009) : Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis
ASTM    D 5514/D 5514M-14 : Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics
ASTM    D 5515-97(2010)e1 : Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer
ASTM    D 5516-09 : Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
ASTM    D 5517-14 : Standard Test Method for Determining Extractability of Metals from Art Materials
ASTM    D 5519-07 : Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM    D 5520-11 : Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
ASTM    D 5521/D 5521M-13 : Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers
ASTM    D 5523-10 : Standard Test Method for Polyurethane Raw Materials  Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates
ASTM    D 5526-12 : Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
ASTM    D 5527-00(2011) : Standard Practices for  Measuring Surface Wind and Temperature by Acoustic Means
ASTM    D 5528-13 : Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM    D 5530-94(2009) : Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
ASTM    D 5531-05(2011) : Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM    D 5534-94(2011)e1 : Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
ASTM    D 5536-94(2010) : Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties
ASTM    D 5537-10 : Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
ASTM    D 5538-13 : Standard Practice for Thermoplastic Elastomers – Terminology and Abbreviations
ASTM    D 5539-13 : Standard Specification for Seed Starter Mix
ASTM    D 5540-13 : Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
ASTM    D 5541-94(2014) : Standard Practice for Developing a Stage-Discharge Relation for Open Channel Flow
ASTM    D 5542-04(2009) : Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM    D 5543-09 : Standard Test Methods for Low-Level Dissolved Oxygen in Water
ASTM    D 5544-11 : Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water
ASTM    D 5546-09 : Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
ASTM    D 5547-95(2009) : Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption
ASTM    D 5548-13 : Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings)
ASTM    D 5550-06 : Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM    D 5551-95(2012) : Standard Test Method for Determination of the Cloud Point of Oil
ASTM    D 5552-10 : Standard Test Method for Resistance of Colored Leather to Bleeding
ASTM    D 5553-95(2012) : Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
ASTM    D 5554-95(2011) : Standard Test Method for Determination of the Iodine Value of Fats and Oils
ASTM    D 5555-95(2011) : Standard Test Method for Determination of Free Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils Used in Fat Liquors and Stuffing Compounds
ASTM    D 5556-95(2011) : Standard Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fat Liquors and Softening Compounds
ASTM    D 5557-95(2011) : Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
ASTM    D 5558-95(2011) : Standard Test Method for Determination of the Saponification Value of Fats and Oils
ASTM    D 5559-95(2011) : Standard Test Method for Determination of Acidity as Free Fatty Acids/Acid Number in the Absence of Ammonium or Triethanolamine Soaps in Sulfonated and Sulfated Oils
ASTM    D 5560-95(2011) : Standard Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils
ASTM    D 5562-95(2011) : Standard Test Method for Determination of the Acidity as Free Fatty Acids/Acid Number in the Presence of Ammonium or Triethanolamine Soaps
ASTM    D 5564-95(2011) : Standard Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils
ASTM    D 5565-95(2011) : Standard Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils
ASTM    D 5566-95(2011) : Standard Test Method for Determination of Inorganic Salt Content of Sulfated and Sulfonated Oils
ASTM    D 5567-94(2011) : Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
ASTM    D 5568-08 : Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies
ASTM    D 5570/D 5570M-10 : Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure
ASTM    D 5571-94(2010) : Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
ASTM    D 5572-95(2012) : Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
ASTM    D 5573-99(2012) : Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
ASTM    D 5574-94(2012) : Standard Test Methods for  Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints
ASTM    D 5575-07(2013) : Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
ASTM    D 5576-00(2013) : Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FTIR)
ASTM    D 5577-94(2010)e1 : Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
ASTM    D 5578-04(2010) : Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)
ASTM    D 5579-13 : Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
ASTM    D 5580-13 : Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
ASTM    D 5581-07A(2013) : Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
ASTM    D 5582-00(2006) : Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator
ASTM    D 5585-11e1 : Standard Tables of Body Measurements for Adult Female Misses Figure Type, Size Range 00–20
ASTM    D 5586/D 5586M-10 : Standard Tables of Body Measurements for Women Aged 55 and Older (All Figure Types)
ASTM    D 5587-14 : Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
ASTM    D 5588-97(2012) : Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas Materials, and Plant Area
ASTM    D 5589-09(2013) : Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement
ASTM    D 5590-00(2010)E1 : Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM    D 5591-04(2011) : Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM    D 5592-94(2010) : Standard Guide for Material Properties Needed in Engineering Design Using Plastics
ASTM    D 5594-98 (Reapproved 2012) : Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
ASTM    D 5596-03(2009) : Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
ASTM    D 5598-01(2012) : Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
ASTM    D 5599-00(2010) : Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM    D 5600-14 : Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM    D 5602/D 5602M-11 : Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
ASTM    D 5603-01(2008) : Standard Classification for  Rubber Compounding Materials<span class=’unicode’>&#x2014;</span>Recycled Vulcanizate Particulate Rubber
ASTM    D 5604-96(2012) : Standard Test Methods for Precipitated Silica – Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM    D 5605-94(2011) : Standard Practice for  Styrene-Butadiene Rubber (SBR)&mdash;Establishing Raw Mooney Viscosity Target Values
ASTM    D 5606-09(2013) : Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock
ASTM    D 5607-08 : Standard Test Method for  Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
ASTM    D 5608-10 : Standard Practices for  Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites
ASTM    D 5609-94(2008) : Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling
ASTM    D 5610-94(2008) : Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling
ASTM    D 5611-94(2008) : Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application
ASTM    D 5612-94(2013) : Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program
ASTM    D 5613-94(2014) : Standard Test Method for Open-Channel Measurement of Time of Travel Using Dye Tracers
ASTM    D 5614-94(2014) : Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST