List of ASTM Standard 10301 to 10400

ASTM    D 5264-98(2011) : Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
ASTM    D 5265-09 : Standard Test Method for Bridge Impact Testing
ASTM    D 5266-13 : Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints
ASTM    D 5267-97(2012) : Standard Test Method for Determination of Extrudability of Cartridge Adhesives
ASTM    D 5268-13 : Standard Specification for Topsoil Used for Landscaping Purposes
ASTM    D 5269-96(2008) : Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method
ASTM    D 5270-96(2014) : Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
ASTM    D 5272-08(2013) : Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics
ASTM    D 5273-92(2012) : Standard Guide for Analysis of Propylene Concentrates
ASTM    D 5274-00(2009) : Standard Guide for Analysis of 1,3-Butadiene Product
ASTM    D 5275-11 : Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids
ASTM    D 5276-98(2009) : Standard Test Method for Drop Test of Loaded Containers by Free Fall
ASTM    D 5277-92(2008) : Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM    D 5278/D 5278M-09(2013) : Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
ASTM    D 5279-13 : Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
ASTM    D 5280-96(2013) : Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
ASTM    D 5281-98(2013) : Standard Test Method for Collection and Analysis of Hexavalent Chromium in Ambient Atmospheres
ASTM    D 5282-05(2012) : Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation
ASTM    D 5283-92(2009) : Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation
ASTM    D 5284-09 : Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid
ASTM    D 5286-01(2011) : Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints
ASTM    D 5287-08 : Standard Practice for Automatic Sampling of Gaseous Fuels
ASTM    D 5288-10 : Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM    D 5289-12 : Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM    D 5291-10 : Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM    D 5292-99(2009) : Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy
ASTM    D 5293-14 : Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –5 °C and –35 °C Using Cold-Cranking Simulator
ASTM    D 5295-00(2006) : Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems
ASTM    D 5296-11 : Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM    D 5297-95(2009) : Standard Test Methods for Rubber Chemical Accelerator-Purity by High Performance Liquid Chromatography
ASTM    D 5298-10 : Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
ASTM    D 5299-99(2012)E1 : Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
ASTM    D 5301-92(2012) : Standard Practice for Physical Characterization of Paint Brushes
ASTM    D 5303-92(2012) : Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography
ASTM    D 5304-11 : Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
ASTM    D 5305-12 : Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor
ASTM    D 5306-92(2013) : Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
ASTM    D 5309-08(2013)E1 : Standard Specification for Cyclohexane 999
ASTM    D 5310-10(2014) : Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography
ASTM    D 5311/D 5311M-13 : Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
ASTM    D 5312/D 5312M-12(2013) : Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions
ASTM    D 5313/D 5313M-12(2013) : Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions
ASTM    D 5314-92(2006) : Standard Guide for Soil Gas Monitoring in the Vadose Zone
ASTM    D 5315-04(2011) : Standard Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization
ASTM    D 5316-98(2011) : Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography
ASTM    D 5317-98(2011) : Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
ASTM    D 5319-12 : Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels
ASTM    D 5321/D 5321M-14 : Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
ASTM    D 5322-98(2009) : Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
ASTM    D 5323-92(2011) : Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes
ASTM    D 5324-10 : Standard Guide for Testing Water-Borne Architectural Coatings
ASTM    D 5325-03(2008)e1 : Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints
ASTM    D 5326-94A(2013) : Standard Test Method for Color Development in Tinted Latex Paints
ASTM    D 5327-97(2013) : Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
ASTM    D 5329-09 : Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks  in Asphaltic and Portland Cement Concrete Pavements
ASTM    D 5330/D 5330M-06(2012) : Standard Specification for  Pressure-Sensitive Tape for Packaging, Filament-Reinforced
ASTM    D 5331-03(2009)e1 : Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
ASTM    D 5334-14 : Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
ASTM    D 5335-14 : Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
ASTM    D 5336-09 : Standard Specification for Polyphthalamide (PPA) Injection Molding Materials
ASTM    D 5337-11 : Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps
ASTM    D 5338-11 : Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures
ASTM    D 5340-12 : Standard Test Method for Airport Pavement Condition Index Surveys
ASTM    D 5341-99(2010)e1 : Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)
ASTM    D 5343-06(2012)e1 : Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners
ASTM    D 5344-99(2011) : Standard Test Method for Extension Force of Partially Oriented Yarn
ASTM    D 5346-93(2009) : Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
ASTM    D 5347-95(2012) : Standard Test Method for Determination of the Ash Content of Fats and Oils
ASTM    D 5348-95(2012) : Standard Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene
ASTM    D 5349-95(2012) : Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method
ASTM    D 5350-95(2012) : Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
ASTM    D 5351-93(2009) : Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B
ASTM    D 5352-95(2012) : Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM    D 5353-95(2012) : Standard Test Method for Determination of Total Desulfated Fatty Matter
ASTM    D 5354-95(2012) : Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils
ASTM    D 5355-95(2012) : Standard Test Method for Specific Gravity of Oils and Liquid Fats
ASTM    D 5356-10 : Standard Test Method for PH of Chrome Tanning Solutions
ASTM    D 5357-03(2013) : Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
ASTM    D 5358-93(2009) : Standard Practice for Sampling with a Dipper or Pond Sampler
ASTM    D 5359-98(2010) : Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber
ASTM    D 5360-09 : Standard Practice for Design and Construction of Bituminous Surface Treatments
ASTM    D 5361/D 5361M-14 : Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
ASTM    D 5362-13 : Standard Test Method for Snagging Resistance of Fabrics (Bean Bag)
ASTM    D 5363-03(2008) : Standard Specification for Anaerobic Single-Component Adhesives (AN)
ASTM    D 5364-08e1 : Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units
ASTM    D 5365-12 : Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM    D 5366-96(2011) : Standard Test Method for Determining the Dynamic Performance of a Wind Vane
ASTM    D 5367-08 : Standard Practice for  Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used   to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted
ASTM    D 5368-13 : Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM    D 5369-93(2008)e1 : Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction
ASTM    D 5370-14 : Standard Specification for Pozzolanic Blended Materials in Construction Applications
ASTM    D 5372-04(2009) : Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
ASTM    D 5373-14 : Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke
ASTM    D 5374-13 : Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM    D 5375/D 5375M-98(2011) : Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
ASTM    D 5376-06(2012) : Standard Test Method for Rubber Compounding Materials – Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ
ASTM    D 5377-93(2012) : Standard Classification for Rubber Compounding Materials – Ground Coal
ASTM    D 5378-12 : Standard Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use
ASTM    D 5379/D 5379M-12 : Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM    D 5380-93(2009) : Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis


Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *


    Testing Needed *





    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    Telephone : (0253) 2361782
    Mobile : +91 9552508782



    [sp_faq category="19"]


    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services


    Need help or have a question? (0253) 2361782