List of ASTM Standard 10201 to 10300

ASTM    D 5151-06(2011) : Standard Test Method for Detection of Holes in Medical Gloves
ASTM    D 5153-10 : Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
ASTM    D 5154-10 : Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM    D 5155-10 : Standard Test Methods for Polyurethane Raw Materials  Determination of the Isocyanate Content of Aromatic Isocyanates
ASTM    D 5156-02(2008) : Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
ASTM    D 5157-97(2008) : Standard Guide for Statistical Evaluation of Indoor Air Quality Models
ASTM    D 5158-98(2013) : Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM    D 5159-04(2009) : Standard Guide for Dusting Attrition of Granular Activated Carbon
ASTM    D 5160-95(2008) : Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon
ASTM    D 5161-04a : Standard Guide for Specifying Inspection Requirements for Coating and Lining Work (Metal Substrates)
ASTM    D 5162-08 : Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating  on Metallic Substrates
ASTM    D 5163-08 : Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants
ASTM    D 5164-05(2011) : Standard Specification for Propylene Glycol and Dipropylene Glycol
ASTM    D 5165-12 : Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle
ASTM    D 5166-97(2008)e1 : Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
ASTM    D 5167-13 : Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
ASTM    D 5168-12 : Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
ASTM    D 5169-98(2010) : Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
ASTM    D 5170-98(2010) : Standard Test Method for Peel Strength (“T” Method) of Hook and Loop Touch Fasteners
ASTM    D 5171-09a : Standard Test Method for Impact Resistance of Plastic Sew-Through Buttons
ASTM    D 5172-91(2010)e1 : Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water
ASTM    D 5173-97(2007) : Standard Test Method for On-Line Monitoring of Carbon Compounds in Water by Chemical Oxidation, by UV Light Oxidation, by Both, or by High Temperature Combustion Followed by Gas Phase NDIR or by Electrolytic Conductivity
ASTM    D 5174-07(2013) : Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry
ASTM    D 5175-91(2011) : Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
ASTM    D 5176-08 : Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM    D 5178-13 : Standard Test Method for Mar Resistance of Organic Coatings
ASTM    D 5179-02(2008) : Standard Test Method for  Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
ASTM    D 5181-09 : Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
ASTM    D 5182-97(2014) : Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
ASTM    D 5183-05(2011) : Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
ASTM    D 5184-12 : Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM    D 5185-13E1 : Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM    D 5186-03(2009) : Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography
ASTM    D 5187-10 : Standard Test Method for Determination of Crystallite Size (L<inf>c</inf> of Calcined Petroleum Coke by X-Ray Diffraction
ASTM    D 5188-14 : Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)
ASTM    D 5190-07 : Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method)
ASTM    D 5191-13 : Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM    D 5192-09 : Standard Practice for Collection of Coal Samples from Core
ASTM    D 5193/D 5193M-93(2012) : Standard Test Method for Coated Fabrics – Air Retention
ASTM    D 5194-13 : Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons
ASTM    D 5195-08 : Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
ASTM    D 5196-06(2013) : Standard Guide for Bio-Applications Grade Water
ASTM    D 5197-09e1 : Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)
ASTM    D 5198-09 : Standard Practice for Nitric Acid Digestion of Solid Waste
ASTM    D 5199-12 : Standard Test Method for  Measuring the Nominal Thickness of Geosynthetics
ASTM    D 5200-03(2008)e1 : Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans
ASTM    D 5201-05a(2010) : Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
ASTM    D 5202-08 : Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
ASTM    D 5203-07 : Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources
ASTM    D 5204-13 : Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM    D 5205-10 : Standard Classification System for Polyetherimide (PEI) Materials
ASTM    D 5206-13 : Standard Test Method for Windload Resistance of Rigid Plastic Siding
ASTM    D 5207-14 : Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials
ASTM    D 5208-14 : Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
ASTM    D 5210-92(2007) : Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge
ASTM    D 5211-12 : Standard Specification for Xylenes for p-Xylene Feedstock
ASTM    D 5213-12 : Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications
ASTM    D 5215-93(2012) : Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
ASTM    D 5217-91(2009) : Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
ASTM    D 5219-09 : Standard Terminology Relating to Body Dimensions for Apparel Sizing
ASTM    D 5220-14 : Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
ASTM    D 5222-08 : Standard Specification for High Fire-Point Mineral Electrical Insulating Oils
ASTM    D 5224-12 : Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
ASTM    D 5225-14 : Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
ASTM    D 5226-98(2010)e1 : Standard Practice for Dissolving Polymer Materials
ASTM    D 5227-13 : Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins
ASTM    D 5228-92(2010) : Standard Test Method for Determination of Butane Working Capacity of Activated Carbon
ASTM    D 5229/D 5229M-14 : Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
ASTM    D 5230-13 : Standard Test Method for Carbon Black – Automated Individual Pellet Hardness
ASTM    D 5231-92(2008) : Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM    D 5232-13 : Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM    D 5233-92(2009) : Standard Test Method for Single Batch Extraction Method for Wastes
ASTM    D 5234-92(2012) : Standard Guide for Analysis of Ethylene Product
ASTM    D 5235-13 : Standard Test Method for Microscopical Measurement of Dry Film Thickness of Coatings on Wood Products
ASTM    D 5236-03(2011) : Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
ASTM    D 5237-05(2013) : Standard Guide for Evaluating Fabric Softeners
ASTM    D 5238-10 : Standard Test Method for Smoldering Combustion Potential of Cotton-Based Batting
ASTM    D 5239-12 : Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization
ASTM    D 5240/D 5240M-12(2013) : Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate
ASTM    D 5241-92(2011) : Standard Practice for Micro-Extraction of Water for  Analysis of Volatile and Semi-Volatile Organic Compounds in Water
ASTM    D 5242-92(2013) : Standard Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs
ASTM    D 5243-92(2013) : Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts
ASTM    D 5244-92(2004) : Standard Practice for Recovery of Enteroviruses from Waters
ASTM    D 5245-92(2012) : Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
ASTM    D 5246-13 : Standard Test Method for Isolation and Enumeration of Pseudomonas aeruginosa from Water
ASTM    D 5248-04(2010) : Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
ASTM    D 5249-10 : Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
ASTM    D 5250-06(2011) : Standard Specification for Poly(vinyl chloride) Gloves for Medical Application
ASTM    D 5252-11 : Standard Practice for the Operation of the Hexapod Tumble Drum Tester
ASTM    D 5253-04(2010)e1 : Standard Terminology Relating to Floor Coverings and Textile Upholstered Furniture
ASTM    D 5254/D 5254M-92(2010)e1 : Standard Practice for Minimum Set of Data Elements to Identify a Groundwater Site
ASTM    D 5255-01(2008) : Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock
ASTM    D 5256-14 : Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
ASTM    D 5257-11 : Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography
ASTM    D 5258-02(2013) : Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
ASTM    D 5259-92(2012) : Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
ASTM    D 5260-04(2010) : Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM    D 5261-10 : Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM    D 5262-07(2012) : Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics
ASTM    D 5263-93(2008)e1 : Standard Test Method for  Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST