List of ASTM Standard 10001 to 10100

ASTM    D 4910/D 4910M-08(2013) : Standard Tables of Body Measurements for Children, Infant Sizes – Preemie to 24 Months
ASTM    D 4912/D 4912M-14 : Standard Test Method for Fabric Stability of Vinyl-Coated Glass Yarn Insect Screening and Louver Cloth
ASTM    D 4913-00(2011) : Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
ASTM    D 4914-08 : Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
ASTM    D 4919-03(2008) : Standard Specification for Testing of Hazardous Materials Packagings
ASTM    D 4920-13 : Standard Terminology Relating to Conditioning, Chemical, and Thermal Properties
ASTM    D 4921-95(2012) : Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature
ASTM    D 4922-09 : Standard Test Method for Determination of Radioactive Iron in Water
ASTM    D 4924-89(2012) : Standard Classification for Petroleum Waxes for Use in Rubber Compounding
ASTM    D 4926-06(2011) : Standard Test Method for Gamma Alumina Content in Catalysts Containing Silica and Alumina by X-ray Powder Diffraction
ASTM    D 4927-10 : Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM    D 4928-12 : Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM    D 4929-07 : Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM    D 4930-06(2011) : Standard Test Method for Dust Control Material on Calcined Petroleum Coke
ASTM    D 4931-06(2011) : Standard Test Method for Gross Moisture in Green Petroleum Coke
ASTM    D 4932/D 4932M-89(2014)E1 : Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing, and Shingles
ASTM    D 4933-99(2010) : Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials
ASTM    D 4934-02(2012) : Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators – Insolubles
ASTM    D 4935-10 : Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials
ASTM    D 4936-10 : Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
ASTM    D 4937-96(2012) : Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography
ASTM    D 4938-89(2013) : Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water
ASTM    D 4939-89(2013) : Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
ASTM    D 4940-10 : Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives
ASTM    D 4941-06(2010) : Standard Practice for Preparing Drawdowns of Artists’ Paste Paints
ASTM    D 4942-11 : Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer
ASTM    D 4943-08 : Standard Test Method for Shrinkage Factors of Soils by the Wax Method
ASTM    D 4944-11 : Standard Test Method for  Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
ASTM    D 4945-12 : Standard Test Method for High-Strain Dynamic Testing of Deep Foundations
ASTM    D 4946-89(2012) : Standard Test Method for Blocking Resistance of Architectural Paints
ASTM    D 4947-05 : Standard Test Method for Chlordane and Heptachlor Residues in Indoor Air
ASTM    D 4948-89(2012) : Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid
ASTM    D 4950-13 : Standard Classification and Specification for Automotive Service Greases
ASTM    D 4951-09 : Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM    D 4952-12 : Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM    D 4953-06(2012) : Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
ASTM    D 4954-89(2009) : Standard Test Method for Determination of Nitrilotriacetates in Detergents
ASTM    D 4955-89(2008) : Standard Practice for Field Evaluation of Automotive Polish
ASTM    D 4956-13 : Standard Specification for Retroreflective Sheeting for Traffic Control
ASTM    D 4957-08 : Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer
ASTM    D 4958-10 : Standard Test Method for Comparison of the Brush Drag of Latex Paints
ASTM    D 4959-07 : Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating
ASTM    D 4960-08(2013) : Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials
ASTM    D 4962-02(2009) : Standard Practice for NaI(Tl) Gamma-Ray Spectrometry of Water
ASTM    D 4963/D 4963M-11 : Standard Test Method for Ignition Loss of Glass Strands and Fabrics
ASTM    D 4964-96(2012)E1 : Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rateof-Extension Type Tensile Testing Machine)
ASTM    D 4966-12E1 : Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
ASTM    D 4967-99(2013) : Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables
ASTM    D 4968-09 : Standard Guide for Annual Review of Test Methods and Specifications for Plastics
ASTM    D 4969-07 (Reapproved 2012) : Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric
ASTM    D 4970/D 4970M-10e1 : Standard Test Method for  Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
ASTM    D 4971-08 : Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
ASTM    D 4972-13 : Standard Test Method for pH of Soils
ASTM    D 4974-04(2011) : Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM    D 4975-14 : Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel
ASTM    D 4976-12a : Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM    D 4977/D 4977M-03(2013)E1 : Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
ASTM    D 4978-95(2007) : Standard Test Methods for Screening of Reactive Sulfides in Waste
ASTM    D 4979-12 : Standard Test Method for Physical Description Screening Analysis in Waste
ASTM    D 4981-12 : Standard Test Method for Screening of Oxidizers in Waste
ASTM    D 4982-12 : Standard Test Methods for Flammability Potential Screening Analysis of Waste
ASTM    D 4984-06(2011) : Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
ASTM    D 4985-10 : Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM    D 4986-10 : Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
ASTM    D 4989/D 4989M-90A(2014)E1 : Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
ASTM    D 4990-97A(2013) : Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing
ASTM    D 4991-07 : Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
ASTM    D 4992-14 : Standard Practice for Evaluation of Rock to be Used for Erosion Control
ASTM    D 4993-08(2014) : Standard Practice for Calculation and Adjustment of Silica (SiO2) Scaling for Reverse Osmosis
ASTM    D 4994-89(2014) : Standard Practice for Recovery of Viruses from Wastewater Sludges
ASTM    D 4995-10 : Standard Specifications for Electronic and Degreasing Grades of 1,1,2-Trichloro 1,2,2,-Trifluoroethane Solvent
ASTM    D 4998-13 : Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
ASTM    D 5000-05 : Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor
ASTM    D 5001-10 : Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ASTM    D 5002-13 : Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM    D 5003-06a(2011) : Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke
ASTM    D 5004-11 : Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
ASTM    D 5006-11 : Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM    D 5007-99(2013) : Standard Test Method for Wet-to-Dry Hiding Change
ASTM    D 5008-07(2012) : Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography
ASTM    D 5009-02(2011) : Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM    D 5010-08ae1 : Standard Guide for Testing Printing Inks and Related Materials
ASTM    D 5011-92(2009) : Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
ASTM    D 5012-01(2013) : Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
ASTM    D 5013-89(2009) : Standard Practices for Sampling Wastes from Pipes and Other Point Discharges
ASTM    D 5015-02(2008) : Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM    D 5016-08e1 : Standard Test Method for  Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
ASTM    D 5017-96(2009)e1 : Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
ASTM    D 5018-89(2009) : Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
ASTM    D 5023-07 : Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM    D 5024-07 : Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
ASTM    D 5025-12 : Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
ASTM    D 5026-06 : Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
ASTM    D 5028-09 : Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM    D 5029-98(2009) : Standard Test Method for Water Solubles in Activated Carbon
ASTM    D 5030/D 5030M-13A : Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
ASTM    D 5031/D 5031M-13 : Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
ASTM    D 5032-11 : Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
ASTM    D 5034-09(2013) : Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
ASTM    D 5035-11 : Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    USA
    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782

    TESTING SERVICES

     

    [sp_faq category="19"]

      

    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST