List of ASTM Standard 1201 to 1300

ASTM    E 381-01(2012) : Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
ASTM    D 381-12 : Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM    F 381-14 : Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
ASTM    E 382-12 : Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
ASTM    F 382-99(2008)e1 : Standard Specification and Test Method for Metallic Bone Plates
ASTM    C 384-04(2011) : Standard Test Method for  Impedance and Absorption of Acoustical Materials by Impedance Tube Method
ASTM    A 384/A 384M-07(2013) : Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
ASTM    F 384-12 : Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
ASTM    E 384-11e1 : Standard Test Method for Knoop and Vickers Hardness of Materials
ASTM    C 385-58(2014) : Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils
ASTM    E 385-11 : Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
ASTM    A 385/A 385M-11 : Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM    B 386-03(2011) : Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
ASTM    E 386-90(2011) : Standard Practice for Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy
ASTM    F 386-11 : Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
ASTM    C 386-93(2012) : Standard Practice for Use of Chemical-Resistant Sulfur Mortar
ASTM    A 387/A 387M-11 : Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
ASTM    D 387-00(2008) : Standard Test Method for  Color and Strength of Chromatic Pigments with a Mechanical Muller
ASTM    C 387/C 387M-11b : Standard Specification for  Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
ASTM    F 387-11 : Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
ASTM    B 387-10 : Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
ASTM    E 387-04(2009) : Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM    A 388/A 388M-11 : Standard Practice for  Ultrasonic Examination of Steel Forgings
ASTM    E 388-04(2009) : Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers <sup>,</sup>
ASTM    D 388-12 : Standard Classification of  Coals by Rank
ASTM    B 388-06(2012) : Standard Specification for Thermostat Metal Sheet and Strip
ASTM    B 389-81(2008) : Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM    E 389-13 : Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials
ASTM    A 389/A 389M-13 : Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
ASTM    F 390-11 : Standard Test Method for  Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
ASTM    A 390-06(2011) : Standard Specification for  Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
ASTM    E 390-11 : Standard Reference Radiographs for Steel Fusion Welds
ASTM    C 390-08(2013) : Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
ASTM    A 391/A 391M-07(2012) : Standard Specification for Grade 80 Alloy Steel Chain
ASTM    B 391-09e1 : Standard Specification for Niobium and Niobium Alloy Ingots
ASTM    B 392-09e1 : Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
ASTM    A 392-11a : Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
ASTM    F 392/F 392M-11 : Standard Test Method for Flex Durability of Flexible Barrier Materials
ASTM    E 393-13 : Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters
ASTM    C 393/C 393M-11e1 : Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM    B 393-09e1 : Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
ASTM    B 394-09e1 : Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
ASTM    C 394/C 394M-13 : Standard Test Method for Shear Fatigue of Sandwich Core Materials
ASTM    A 394-08e1 : Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
ASTM    E 394-09 : Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
ASTM    D 395-03(2008) : Standard Test Methods for Rubber Property&#8212;Compression Set
ASTM    F 395-10 : Standard Terminology Relating to Vacuum Cleaners
ASTM    C 395-01(2012) : Standard Specification for Chemical-Resistant Resin Mortars
ASTM    A 395/A 395M-99(2014) : Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
ASTM    B 395/B 395M-13 : Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
ASTM    E 396-12e1 : Standard Test Methods for Chemical Analysis of Cadmium
ASTM    D 396-14 : Standard Specification for Fuel Oils
ASTM    F 396-00(2009) : Standard Practice for Comparing One-Time Noncorrectable Typewriter Ribbons
ASTM    C 397-00(2012) : Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
ASTM    E 398-13 : Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
ASTM    B 398/B 398M-14 : Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes
ASTM    C 398-98(2012) : Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry
ASTM    C 399-98(2012) : Standard Practice for Use of Chemical-Resistant Resin Mortars
ASTM    E 399-12E3 : Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
ASTM    B 399/B 399M-04(2010) : Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
ASTM    F 400-10 : Standard Consumer Safety Specification for Lighters
ASTM    A 400-69(2012) : Standard Practice for  Steel Bars, Selection Guide, Composition, and Mechanical Properties
ASTM    B 400/B 400M-14 : Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
ASTM    C 400-98(2013) : Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
ASTM    B 401-12 : Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
ASTM    C 401-12 : Standard Classification of  Alumina and Alumina-Silicate Castable Refractories
ASTM    A 401/A 401M-10 : Standard Specification for Steel Wire, Chromium-Silicon Alloy
ASTM    F 402-05(2012) : Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
ASTM    D 402-08 : Standard Test Method for  Distillation of Cutback Asphaltic (Bituminous) Products
ASTM    A 403/A 403M-13A : Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
ASTM    C 403/C 403M-08 : Standard Test Method for  Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM    B 403-12 : Standard Specification for Magnesium-Alloy Investment Castings
ASTM    C 404-11 : Standard Specification for Aggregates for Masonry Grout
ASTM    F 404-14 : Standard Consumer Safety Specification for High Chairs
ASTM    E 405-04(2012) : Standard Test Methods for  Wear Testing Rotary Operators for Windows
ASTM    F 405-13 : Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings
ASTM    C 406/C 406M-10 : Standard Specification for Roofing Slate
ASTM    F 406-13 : Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
ASTM    B 406-96(2010) : Standard Test Method for Transverse Rupture Strength of Cemented Carbides
ASTM    E 406-81(2012) : Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis
ASTM    A 407-07(2013) : Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
ASTM    B 407-08a : Standard Specification for  Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
ASTM    E 407-07e1 : Standard Practice for Microetching Metals and Alloys
ASTM    E 408-13 : Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM    C 408-88(2011) : Standard Test Method for Thermal Conductivity of Whiteware Ceramics
ASTM    B 408-06(2011) : Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
ASTM    F 408-99(2008) : Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer
ASTM    B 409-06(2011) : Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
ASTM    F 409-12 : Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
ASTM    A 409/A 409M-13 : Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM    D 409/D 409M-12 : Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
ASTM    F 410-08(2013) : Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
ASTM    C 410-13 : Standard Specification for Industrial Floor Brick
ASTM    E 410-08 : Standard Test Method for Moisture and Residue in Liquid Chlorine
ASTM    A 411-08(2013) : Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
ASTM    C 411-11 : Standard Test Method for  Hot-Surface Performance of High-Temperature Thermal Insulation
ASTM    D 411-08 : Standard Test Methods for  Shellac Used for Electrical Insulation
ASTM    B 411/B 411M-14 : Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
ASTM    E 411-12 : Standard Test Method for  Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
ASTM    C 412M-11 : Standard Specification for  Concrete Drain Tile (Metric)


Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email ID *

    Phone *


    Testing Needed *





    Telephone :+1 770.823.5031
    Telephone:+1 404.918.8782

    Telephone : (0253) 2361782
    Mobile : +91 9552508782



    [sp_faq category="19"]


    [sp_faq category="20"]
    [sp_faq category="21"]
    [sp_faq category="22"]

    Our Team

    Collaborate with us

    Get A Quote

    Our Services


    Need help or have a question? (0253) 2361782